ICOM 382200 Manuale Utente
39
8
DSC OPERATION
D Receiving a Test call
1.
Push any software key to turn OFF the alarm.
2.
Push the software key below your next operation.
[IGN]
• Ignores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
• “
” blinks continuously until you display the call message.
[ABLE]
•
Sends the Acknowledgement “Able to Comply.”
•
The call is saved in the DSC Log.
[ACPT]
•
Accepts the call.
• Displays the received call’s information.
•
The call is saved in the DSC Log.
•
Push the software key below [ACK] to send a Test
Acknowledgement call. (p. 32)
•
Push the software key below [RESEND] to resend.
NOTE
: If the Auto ACK function is set to “Auto,” the Test
Acknowledgement call is automatically sent to the calling
station when the call is received. (p. 42)
When a Test call is received:
• The alarm sounds for 2 minutes.
•
“RCVD Test Call” is displayed.
TIP:
By default, the Auto ACK function automatically
sends an Acknowledgement to the calling station (p. 42).
If the function is set to “Manual,” the following screens are
displayed.
If the function is set to “Manual,” the following screens are
displayed.