ICOM 382200 Manuale Utente
58
10
MENU SCREEN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Position Check
(Default: N-UP)
• N-UP
: The top of the “Position Check” screen represents
North.
• AC-UP
: The top of the “Position Check” screen represents
the direction of your course heading.
UTC Offset
(Default: 00:00)
Set the offset time between Universal Time Coordinated
(UTC) and your local time to between –14:00 and +14:00 (in
1 minute steps).
1 minute steps).
Inactivity Timer
The transceiver automatically returns to the operation screen
if you push no key for the set period of time for each mode.
if you push no key for the set period of time for each mode.
Not DSC Related
(Default: 10 min)
This setting is for when the transceiver displays a screen
that is not related to DSC.
DSC Related
DSC Related
(Default: 15 min)
This setting is for when the transceiver displays a screen
that is related to DSC.
Distress Related
Distress Related
(Default: Off)
This setting is for when the transceiver displays a screen
that is related to a Distress call.
that is related to a Distress call.
RT Related
(Default: 30 sec)
This setting is for when the transceiver is in the Radio
Telephone mode.
Telephone mode.
Float’n Flash
The Float’n Flash function detects that the transceiver
has come in contact with water. When the function turns
ON, the backlight starts to blink to make it easy to find the
transceiver, even in the dark.
has come in contact with water. When the function turns
ON, the backlight starts to blink to make it easy to find the
transceiver, even in the dark.
Function
(Default: On)
• On: The Float’n Flash function is ON.
• Off: The Float’n Flash function is OFF.
• Off: The Float’n Flash function is OFF.
Auto Off
(Default: 20 sec)
After taking the transceiver out of the water, the backlight
keeps blinking for this set period of time. Set the time to
between 0 and 30 seconds (in 10 second steps).
Cycle
Cycle
(Default: 0.5 sec)
The backlight repeatedly turns ON or OFF in the set time
cycle. Set the cycle to 0.5, 1, 2 or 4 seconds.
Alarm
cycle. Set the cycle to 0.5, 1, 2 or 4 seconds.
Alarm
(Default: Off)
Select whether or not to sound an alarm while the backlight
blinks when the Float’n Flash function is turned ON.
• On
• On
: An alarm sounds while the backlight blinks.
• Off
: No alarm sounds, even when the Float’n Flash
function is set to ON.
Power Save
(Default: On)
This function conserves battery power. The power save
function is automatically turned ON when no signal is received
for 5 seconds.
Turn the Power Save function ON or OFF.
for 5 seconds.
Turn the Power Save function ON or OFF.