Manualsbrain.com
  1. Manuali
  2. Marche
  3. ICOM
  4. 398000
  5. Manuale Utente

ICOM 398000 Manuale Utente

Scarica
Pagina di 40
21
9
SET MODE
New2001
 
D
SQL Key Action “
”
The function temporarily opens the squelch.
• Pu (Push):   The Monitor function is activated by holding 
down [SQL] for more than 1 second.
    
 The squelch opens while holding down the key.
• Ho (Hold):   The Monitor function is activated by holding 
down [SQL] for more than 1 second.
     
 The squelch stays open until the user pushes 
any key.
 
D
Backlight “
”
Turns the Automatic Backlight function ON or OFF.
 •OFF:  The function is OFF.
 •ON:   The backlight turns ON for 5 seconds when the user 
pushes any key except [PTT].
 
D
Contrast “
”
Selects the transceiver's display contrast.
 •Hi:  The transceiver's display contrast is set to High.
 •Lo:   The transceiver's display contrast is set to Low.
 
D
Power Save “
”
Turns the Power Save function ON or OFF.
 •OFF:  The function is OFF.
 •ON:   The Power Save function reduces current drain by 
deactivating the receiver circuit of the transceiver at 
specific intervals.
 
D
CH Display “
”
/“
”
/“
”
/“
”
Selects the number of digits to display the channel number.
You can select settings for each channel group.
 •3d:   The channel number is displayed in 3 digits. 
      (Example: 78A)
 •4d:   The channel number is displayed in 4 digits. 
      (Example: 1078)
 
D
Scrambler Code “
”
Set the voice scrambler code to between 1 and 32.
 
D
VOX Level “ ”
Sets the VOX gain level to between 1 (The lowest 
sensitivity) to 10 (The highest sensitivity).
Higher values make the VOX function more sensitive to your 
voice.
 
D
VOX Delay “
”
Sets the VOX Delay to between 1 (The shortest) to 6 (The 
longest) in 0.5 second steps.*
*Example:  If the VOX delay is set to 2, transmitter stays ON for 1 
second.
The VOX Delay is the amount of time the transmitter stays 
ON after you stop speaking before the VOX switches to 
receive.
 
■
Set mode items (Continued)