ICOM 400900 Manuale Utente

– 4 –

– 1 –

A7493W-2EX    Printed in Japan

          © 2018  Icom Inc.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

CONNECTION GUIDE

WIRELESS ACCESS POINT

AP-95M

Thank you for purchasing this Icom product. The AP-

95M 

wireless

 

access

 

point

 is designed and built 

with Icom’s IP network technology. It complies with the 

“IEEE802.11ac Wave 2” standard, and is designed for 

dual band communications in the 5 GHz and 2.4 GHz 

bands.

Read the “PRECAUTIONS” leaflet first, if you have not done so.

D

  • Mounting bracket set

  • Precautions Guide

  • Connection Guide (This guide)

  • Power adapter 

        ( The adapter type differs, depending on the access point version)

D

  • PC

  • LAN cable

This Connection Guide explains the basic operation of the 

AP-95M. Access our website to download the instruction 

manual. 
Icom website   http://www.icom.co.jp/world/

 

•   Adobe

®

 Acrobat Reader

®

 is required on your PC in order to 

display the downloaded PDF instruction manual.

  •  If your PC does not have Adobe

®

 Acrobat Reader

®

, please 

download it from the Adobe

®

 website.

D

*

1

  When there is no wireless device to communicate with the AP-95M, or no wireless communication is performed while the Wireless Unit is 

enabled, the indicator turns OFF. The time when the indicator turns OFF differs, depending on the communication status.

*

2

 While booting up, the [POWER] indicator lights green → blinks green → lights green.

 

L

All indicators light while booting.

Green

Lights

More than 1 connection/WPS succeeded

*1

LAN connected

(1000BASE-T)

[MODE] is held down for 

1 second

Booting

Blinks Wireless operation is

standing by for DFS

—

LAN is communicating 

(1000BASE-T)

WPS is running

Booting/

Updating firmware

Orange

Lights

—

—

LAN connected

(10BASE-T/100BASE-TX)

A firmware update is 

ready (Online update)

—

Blinks

—

—

LAN is communicating

(10BASE-T/100BASE-TX)

WPS failed

(Blinks for 30 seconds)

—

OFF

Other than the above

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the 

United Kingdom, Germany, France, Spain, Russia, 

Australia, New Zealand,

 and/or other countries.

Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other 

countries.

Adobe and Adobe Reader are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

All other products or brands are registered trademarks or trademarks of their respective holders.

[MODE]

Refer to “RESETTING THE AP-95M” in the 

Precautions Guide, for details.

This product radiates or receives radio wave from its top surface, so we recommend mounting on a wall or ceiling.

You can mount on the wall or ceiling using the supplied bracket, by following procedure ➊ to ➎ below.

 

L

To use the security wire, refer to the instruction manual on our website.

q

w

r

t

e

80 mm (3.1 in) 

Hooking screws

(Supplied)

Screw hole

Use the supplied anchor if mounting on drywall.

Hook slots

Tapping screw (Supplied)

Ceiling or wall

3.5 × 32 mm (0.1 × 1.3 in)

13 × 43 mm (0.5 × 1.7 in)

Mark the screw positions using the 

bracket as the template.

162 mm (6.4 in) 

42 mm (1.7 in)

52 mm (2 in)

Dimensions

Wall or

ceiling 

Mount the unit to the bracket by hooking the 

screws (e) to the hook slots (r) and twisting 

the unit until it makes a click sound (t).  

2.6 × 12 mm

(0.1 × 0.5 in)

The following procedures describe how to connect to the AP-95M through a wireless LAN, based on Microsoft

® 

Windows

®

 10.

 

L

The procedure differs, depending on the connected devices, so follow their instructions when using the other devices. 

q  

Start the AP-95M, and then turn ON the PC.

w 

Click the Wireless Network Connection icon.

e  

Select the SSID set to the AP-95M and click [Connect].

Then follow the instructions.

  • The SSID is set to “WIRELESSLAN-0” by default.

q

 

w

 

IEEE802.11ac Wave 2 standard

Dec. 2018

R

Mount the unit securely to a thick surface that can support more than 600 g (1.3 lb).