ICOM IC-703 Manuale Utente

57

7

MEMORY OPERATION

qSelect M2 functions.

• Push [DISPLAY] once or twice to select 

M.

• Push [MENU] one or more times to select 

M2.

wSet the desired frequency and operating mode in

VFO mode.

• If you want to program the split frequency function, pro-

gram both receive and transmit frequencies into VFO A
and B, then turn ON the split function.

• If you want to program a repeater function, set a tone

frequency (pgs. 44, 45) in addition to the receive/trans-
mit frequencies.

eRotate [M-CH] to select the desired memory chan-

nel.

• Select memory mode to confirm the contents, if desired.
• “

}” appears if the selected memory channel is a

blank channel (and does not have contents).

rPush [

(F-1)

MW] for 1 sec. to program the displayed

frequency and operating mode into the memory
channel.

To check the programmed contents, push [

(F-3)

V/M]

to select memory mode.

[EXAMPLE]: Programming 7.088 MHz/LSB into ch 12.

MW

Push for

1 sec.

[DISPLAY]

[MENU]

[M-CH]

[F-3]

[F-1]

■Memory programming

qSelect M2 functions.

• Push [DISPLAY] once or twice to select 

M.

• Push [MENU] one or more times to select 

M2.

wSet the desired frequency and operating mode.

ePush [

(F-3)

V/M] to select memory mode, then se-

lect the desired memory channel with [M-CH].

• Push [

Y]/[Z] when you want to program blank chan-

nels.

rPush [

(F-1)

MW] for 1 sec. to program the displayed

frequency and operating mode into the memory
channel.

[EXAMPLE]: Programming 21.280 MHz/USB into

ch 18.

MW

Push for

1 sec.

[DISPLAY]

[MENU]

[M-CH]

[F-3]

[F-1]

[

Y]

[

Z]