ICOM IC-F620-1 Manuale Utente

4

1

PANEL DESCRIPTION

Activates one of (or two of) the following func-
tions on each channel independently:

• Push and hold the key to unmute the channel (audio

is emitted; ‘Audible’ condition).

• Push the key to toggle the mute and unmute condi-

tions (toggles ‘Audible’ and ‘Inaudible’).

• Push the key to mute the channel (sets to ‘Inaudible’

only).

• Push the key to unmute the channel (sets to ‘Audible’

only).

• Push the key after the communication is finished to

send a ‘reset code’.

The unmute condition (‘Audible’ condi-

tion) may automatically return to the mute condi-
tion (‘Inaudible‘ condition) after a specified peri-
od.

Push 

to toggle bandwidth between wide or

narrow.

Select the transmit output power temporarily or
permanently depending on the pre-setting.
• Ask your Dealer or System Operator for the out-

put power level for each selection.

Select and determine a bank number.

• When the optional UT-105 is installed, push 

then push 

/

to select operating bank

number, and then push 

to determine the

bank number.

Push this key to start scanning; and push again
to stop.

Place the microphone on hook to start

scanning.
Take the microphone off hook to stop scanning.

Push and hold this key to indicate the scan
group, then push to select the desired group.

Adds or deletes the selected channel to the scan
group.

Electronically locks all programmable keys
except the following:

•

(incl. 

and 

), 

and

keys.

IC-F510F520_F610F620- 2.qxd   02.2.4 5:22 PM  Page g (1,1)