ICOM IC-F620-2 Manuale Utente

Pagina di 24
11
3
OPTIONAL SmarTrunk II™ OPERATION
SmarTrunk II™ and 
conventional modes
This transceiver is capable of SmarTrunk II™ functions.
The optional UT-105 allows communication in conventional
channels or SmarTrunk II™ channels. Select a channel bank
for SmarTrunk II™ before trunking operation.
• Push [
BANK
] one or more times to select a channel bank for
conventional channels or SmarTrunk II™ channels.
- Scanning starts when a channel bank for SmarTrunk II™ is select-
ed.
- Contact your Dealer for channel bank details.
NOTE: Connect an optional HM-100TN DTMF MICRO-
PHONE. Contact your Dealer for details.
SmarTrunk II™ operation
These features are enabled by a Dealer or System Operator
and may not be available in your system. Contact your Dealer
for details.
Placing a telephone call
Enter the phone number followed by [1], [M].
• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to talk, and
release it to listen.
Calling another local system subscriber
Enter the subscriber number followed by [3], [M].
• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber
answers.
• If the other subscriber is on another call or out of range, you hear a
fast busy signal and the call terminates automatically.
Receiving a call
When you hear ringing, push [M] to answer.
• For a group call, you hear a short ring followed by two short beeps.
You do not have to answer a group call to hear it over the air.
00  IC-F610EUR.qxd   01.11.28 11:37 AM  Page n (1,1)