ICOM IC-F620-2 Manuale Utente
15
4
CONNECTION AND MAINTENANCE
■Mounting the transceiver
The front panel can be inverted for correct viewing while leav-
ing the built-in speaker facing away from the mounting surface.
ing the built-in speaker facing away from the mounting surface.
D Inverting the Front panel
q Unscrew the 2-side screws.
w Remove the Front panel forward from the transceiver.
e Invert the transceiver 180° clockwise as below.
r Insert the Front panel to the transceiver.
w Remove the Front panel forward from the transceiver.
e Invert the transceiver 180° clockwise as below.
r Insert the Front panel to the transceiver.
t Tight the 2 screws.
NOTE:
• NEVER rotate the transceiver more than 180°.
• DO NOT spread the flat cable too much on the transceiver.
NOTE:
• NEVER rotate the transceiver more than 180°.
• DO NOT spread the flat cable too much on the transceiver.
Damage may occur.
00 IC-F610EUR.qxd 01.11.28 11:37 AM Page r (1,1)