ICOM IC-F620-2 Manuale Utente

3

1

PANEL DESCRIPTION

uSCRAMBLER INDICATOR
Appears when scrambler function is activated. (Optional UT-
109 (#02)/UT110 (#02) SCRAMBLER UNIT is required.)

i2/5TONE INDICATOR
Appears when specified 2/5tone call is received.

o!0 LTR INDICATOR
Appears when LTR function is selected.

!1SHORT MESSAGE INDICATOR
Appears when a short message is received.

!2ALPHANUMERIC DISPLAY
Displays the CH number, 5-tone indication, DTMF numbers,
Audible indication, etc.

NOTE: When the alphanumeric display blinks and trans-
mitting becomes impossible. In this case, check that the
antenna is not miss-matched or that DC battery voltage
has not dropped below 8 V

!3ACTIVATED KEY INDICATOR
Appears or blinks when the key under this indicator is acti-
vated.

■Programmable function keys

The following functions can be assigned to [P0], [P1], [P2],
[P3], [P4], [

∫

∫], [√

√], [

] and [

] programmable function

keys.
Consult your Icom Dealer or System operator for details con-
cerning your transceivers programming.
In the following explanations, programmable function names
are bracketed, the specific switch used to activate the func-
tion depends on programming.

• Select an operating channel.
• Select a transmit code channel after pushing

the [

] key.

• Select a DTMF channel after pushing the

[

] key.

• Select a scan group after pushing and holding

the [

] key.

Select an operating channel directly.

PRIORITY CHANNEL KEYS
Select priority A or priority B channel with each
push.

00  IC-F610EUR.qxd   01.11.28 11:37 AM  Page f (1,1)