ICOM IC-M45A Manuale Utente
7
3
BASIC OPERATION
■
Receiving
➀
Rotate [PWR/VOL] to turn power ON.
➁
Rotate [SQUELCH] fully counterclockwise.
➂
Adjust [PWR/VOL] to a suitable listening level.
➃
Rotate [SQUELCH] clockwise until the audio noise disap-
pears.
pears.
➄
Select a channel. See pgs. 5–6 for details.
• When a signal is received:
➧
The squelch opens.
➧
Audio is emitted from the speaker.
➧
“BUSY” appears in the function display.
➅
When an interrupting signal is received, rotate [SQUELCH]
deeply clockwise.
deeply clockwise.
D
Dual/tri-watch functions
These functions allow you to conveniently check the distress
channel (ch 16) or, both the distress and leisure call channel
(ch 9; programmable) while receiving another channel. When
receiving a signal on one of these channels, the transceiver
stops on the channel until the signal disappears.
channel (ch 16) or, both the distress and leisure call channel
(ch 9; programmable) while receiving another channel. When
receiving a signal on one of these channels, the transceiver
stops on the channel until the signal disappears.
Depending on your preference, select dual watch or tri-watch
in advance in SET mode (p. 12). Dual watch is the default set-
ting.
in advance in SET mode (p. 12). Dual watch is the default set-
ting.
When dual watch is selected in SET mode:
➥
Push [
CH/WX
• DUAL] for 1 sec. to start dual watch.
When tri-watch is selected in SET mode:
➥
Push [
CH/WX
• DUAL] for 1 sec. to start tri-watch.
➥
Push any switch to cancel dual/tri-watch and return to nor-
mal operation.
mal operation.
USA
DUAL
USA
DUAL
BUSY
Checking channel 16
every 2 sec.
every 2 sec.
When receiving a signal
on channel 16. Channel
16 is monitored until the
signal disappears.
on channel 16. Channel
16 is monitored until the
signal disappears.
USA
TRI
CALL
USA
USA
TRI
BUSY
USA
TRI
BUSY
Checking channel 16
and the call channel
every 2 sec.
and the call channel
every 2 sec.
When receiving a signal
on channel 16, channel
16 has priority.
on channel 16, channel
16 has priority.
When receiving a signal
on the call channel, the
call channel is monitored
while checking ch 16 in
2 sec. intervals.
on the call channel, the
call channel is monitored
while checking ch 16 in
2 sec. intervals.
IC-M45A Manual 99.3.29 2:45 PM Page 7