ICOM IC-R75 Manuale Utente
5
14
RECEIVE FUNCTIONS
■
Mode selection
The following modes are available in the IC-R75:
SSB (LSB/USB), CW, CW REV (CW reverse), FM,
AM, RTTY and RTTY REV (RTTY reverse).
SSB (LSB/USB), CW, CW REV (CW reverse), FM,
AM, RTTY and RTTY REV (RTTY reverse).
➥
Push [SSB] to toggle between LSB and USB.
➥
Push [CW/RTTY] momentarily to toggle between
CW and RTTY.
➥
Push [CW/RTTY] for 2 sec. to toggle between CW
and CW reverse or RTTY and RTTY reverse.
➥
Push [AM] to select AM.
➥
Push [FM] to select FM.
The selected mode is indicated in the function
display.
OPERATING MODE SELECTION
SSB
AM
Push
momentarily
FM
Push
momentarily
CW/RTTY
CW
CW REV
RTTY
RTTY REV
Push mode switch
for 2 sec.
for 2 sec.
Push mode switch
momentarily.
momentarily.
AM
FM
LSB
USB
■
Squelch and RF gain
The receiver uses the same control, [RF/SQL], to
adjust one of either the RF gain or the squelch.
[RF/SQL] adjusts either the RF gain or the squelch
depending on the operating mode selected and the
condition of the RF/SQL item in set mode (p. 30).
adjust one of either the RF gain or the squelch.
[RF/SQL] adjusts either the RF gain or the squelch
depending on the operating mode selected and the
condition of the RF/SQL item in set mode (p. 30).
• [RF/SQL] control priority
* The RF gain is set to maximum level when the [RF/SQL]
is set as [SQL] control.
The RF (Radio Frequency) gain is used to adjust the
receiver gain.
receiver gain.
• Shallow rotation moves the S-meter to the right indicating
the signal strength which can be received.
The recommended position for RF gain is the 12
o’clock position since this sets RF gain to the max.
The SQUELCH removes noise output from the
speaker (closed condition) when no signal is
received. The squelch is particularly effective for FM.
It is also available for the other modes.
speaker (closed condition) when no signal is
received. The squelch is particularly effective for FM.
It is also available for the other modes.
• When operating in FM, first rotate the control fully
counterclockwise. Then, rotate the control clockwise to
the point where the noise just disappears. This is the best
position. The squelch does not open for weak signals
the point where the noise just disappears. This is the best
position. The squelch does not open for weak signals
when it is set too deep.
• A segment appears in the S-meter to indicate the
S-meter squelch level.
• When set as the [RF/SQL] control
Set mode
setting
USB, LSB,
CW, RTTY
AM, FM
Sq (SQL)
SQL*
SQL*
At (AUTO)
RF GAIN
SQL*
rS (RF/SQL)
RF/SQL
RF/SQL
Recommended level
Minimum RF gain
Adjustable range
RF gain adjustable
range
range
Maximum RF gain
Maximum RF gain
Squelch is open.
S-meter squelch
S-meter squelch
threshold
threshold
Noise squelch threshold
(FM mode)
(FM mode)
Shallow
Deep
Squelch is open.
S-meter squelch
Noise squelch (FM mode)
Noise squelch (FM mode)
• When set as the [SQL] control
• When set as the [RF] control