ICOM IC-R75 Manuale Utente
18
5
RECEIVE FUNCTIONS
■
Filter selection
The filter selection switches the IF passband width
as shown in the table at right.
as shown in the table at right.
The filter selection is automatically memorized in
each mode.
each mode.
q
Select the desired mode with the mode switches.
w
Push [FIL] one or more times to select the desired
filter combination.
• ã or ç does not appear while in normal IF filter.
• ç appears when wide IF filters are selected.
• ã appears when narrow IF filters are selected.
• ç appears when wide IF filters are selected.
• ã appears when narrow IF filters are selected.
When an optional filter is installed, set the optional
filter in filter set mode. Optional filters are not
selected by default.
selected by default.
• Filter construction
CFWS450E (15 kHz)
CFWS450HT (6 kHz)
FL-65 (2.4 kHz)
FL-257 (3.3 kHz)
FL-96 (2.8 kHz)
FL-222 (1.8 kHz)
FL-52A (500 Hz)
FL-53A (250 Hz)
FL-53A (250 Hz)
optional
FL-23 (15 kHz)
FL-272 (2.4 kHz)
FL-103 (2.8 kHz)
FL-223 (1.9 kHz)
FL-223 (1.9 kHz)
FL-100 (500 Hz)
FL-232 (350 Hz)
FL-101 (250 Hz)
FL-232 (350 Hz)
FL-101 (250 Hz)
optional
Mixer
2nd IF signal
3rd IF signal
9 MHz IF filter
455 kHz IF filter
IF
Filter
Passband
width
Recommended
selectivity
9 MHz
FL-100
500 Hz/–6 dB CW-N, RTTY-N
FL-101
250 Hz/–6 dB
FL-103
2.8 kHz/–6 dB SSB-W
CW-N
FL-223
1.9 kHz/–6 dB SSB-N
455 kHz
FL-52A
500 Hz/–6 dB CW-N, RTTY-N
FL-53A
250 Hz/–6 dB CW-N
FL-96
2.8 kHz/–6 dB SSB-W
FL-232
350 Hz/–6 dB CW-N, RTTY-N
FL-222
1.8 kHz/–6 dB SSB-N
FL-257
3.3 kHz/–6 dB SSB-W