ICOM IC-R75 Manuale Utente

26

7

SCANS

■

q

  Select VFO mode with [V/M].

w

 Select the desired operating mode.

  •  The  operating  mode  can  also  be  changed  while 

scanning.

e

 Set [RF/SQL] open or closed.

  •  See previous page for scan condition.
  •  If the [RF/SQL] control function is set as RF control, 

the squelch always opens. See pgs. 14, 30 for details.

r

 Push [SCAN] to start the programmed scan.

  • “SCAN” appears while scanning.

t

  When the scan detects a signal, the scan stops, 

pauses or ignores it depending on the resume 
setting and the squelch condition.

y

 To cancel the scan, push [SCAN].

  If the same frequencies are programmed into the 

s c a n   e d g e   m e m o r y   c h a n n e l   P 1   a n d   P 2 , 
programmed scan does not start.

■

q

  Select memory mode with [V/M].

w

 Select the desired operating mode.

  •  The  operating  mode  can  also  be  changed  while 

scanning.

e

 Set [RF/SQL] open or closed.

  •  See previous page for scan condition.
  •  If the [RF/SQL] control function is set as RF control, 

the squelch always opens. See pgs. 14, 30 for details.

r

  Push [SCAN] to start the memory/select memory 

scan.

  • “SCAN” appears while scanning.

t

  Push [SEL] to toggle between memory scan and 

select memory scan.

y

  When the scan detects a signal, the scan stops, 

pauses or ignores it depending on the resume 
setting and the squelch condition.

u

 To cancel the scan, push [SCAN].

  2 or more memory channels must be programmed 

for memory scan to start.

■

q

  Select memory mode with [V/M].

w

  Select the desired memory channel to set as 

select memory channel.

e

  Push [SEL] to set the memory channel as a select 

memory or not.

  • “S” appears for select memory channels.

r

  Repeat  steps  w  to  e  to  program  another 

memory channel as a select memory channel, if 
desired.

“S” appears for the select channel.