SHENZHEN 3NOD DIGITAL TECHNOLOGY CO. LTD HXP310 Manuale Utente

1.  Plug one end of the cord into the speaker and the other 

into the headphone jack on your device.

2.  Turn on the speaker.
3.  Hit PLAY on your device and crank it up—or down if 

you’re lame.

You’ll have to play and pause the music from your device, 

not your speaker. No problem. You’re there anyway, right?

USER GUIDE AND WARRANTY INFORMATION

Register your speaker at www.hmdxaudio.com. Information about where you bought it and how you’re 

using it is like gold for the people who make these speakers. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en 

www.hmdxaudio.com.
There are lots of cool HMDX speakers. Check them all out at www.hmdxaudio.com.
Setup is pretty easy, but we put a manual together just in case you need it.  It’s full of information and 

sarcasm—just like that English teacher you had that crazy semester.

HEY. HAVE WE SEEN YOU HERE BEFORE?

1.  This is the power button, press and hold for 

5 seconds to power on.

2.  This light lets you know when Bluetooth is 

paired with your speaker.

3.  Check out how much juice is in the battery.
4.  Here's where you use a mini jack cord to 

hook it up old-school.

5.  The power cord goes here.
6.  Turn the music up or down. (Wait, why do 

you need to turn it down?)

7.  Push it to play, push it again to pause.
8. Carabiner

CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER

HOOKING UP OLD SCHOOL AUDIO, JACK

Charging the speaker is so easy you’ve probably figured it out by now, but just in case, 

you’ve got two options: You can charge it using your computer or a wall outlet.

Plug it in and your speaker will be ready for an epic night in no 

time. You should go get ready too! It needs about 3 hours for

6 hours of party time.

JUST CHARGE IT

1.  The cord that came with the speaker — the one with the 

USB on one end and the Micro USB on the other — is 

made to work with your computer.  

2.  If you want to use the wall outlet, you’ll need to pick up a 

power cord with a Micro USB the next time you’re at the 

store or use any USB AC adaptor, including the one for 

your cell. 

Like any amazing couple, this one starts with a 
connection—one between your device and the 
speaker’s Bluetooth.
Here’s how it works:
1.  We know you’re probably going to think, 

“derp” with this one, but we have to say it: 
Make sure the smartphone, tablet or computer 
you want to hook up to the speaker has 
Bluetooth. (There. We got that out of the way.)

2.  Turn on the speaker (press and hold for 5 

seconds) and look for the little blinking light.

3.  Do whatever your device needs you to do on 

its end. (We don’t know what you’re using. 
We’re not spies.)

4.  Look for HMDX Flow in your device’s 

Bluetooth list or click YES—whatever pops up 
on your device—and BAM! you’re connected.

BLUETOOTH

®

 CONNECTION: IT’S A SETUP

5.  Now hit PLAY on your speaker and crank it 

up—or down if you’re lame.

You’re probably only going to have to do this 
once, unless your device goes through a major 
I-just-dropped-it-in-the-pool kind of reboot. The 
device and Bluetooth will find each other every 
time just as long as the speaker is set to 
Bluetooth and your device’s Bluetooth is, you 
know—on.
If you’re connecting to a computer, you may have 
some extra steps on that end. You’ll have to get 
that information from the computer company.
Depending on your device you may be prompted 
to enter a pairing code. If prompted enter “

0000” 

as the code.

HX-P310

ALLOW US TO SHED SOME LIGHT

Solid RED

Charging

Ready to Party 

(Light will only 

show when unit is plugged in) 

Light Off

Quick Flash BLUE Looking for Bluetooth

Slow Flash BLUE

Connected

RED

Hooking up old-school 

with a cord

What It Looks Like

What it Means

PACKAGE CONTENTS

Charging Cord

User Manual

Speaker

Carabiner

with Strap