Shenzhen Coban Electronics Co. Ltd. 302 Manuale Utente
6.11 GPS drift suppression
6.11.1 This function is deactivated by default, to activate this function, send SMS
"suppress+password" to tracker, it will reply" suppress drift ok". The GPS data
stop updating if vehicle is not driving (ACC is OFF) and latitude and longitude
always keep same, and GPS data updates automatically when vehicle is moving.
stop updating if vehicle is not driving (ACC is OFF) and latitude and longitude
always keep same, and GPS data updates automatically when vehicle is moving.
6.11.2 Cancel: send "nosuppress+password" to tracker, it will reply" nosuppress ok ".
6.12 Exact street address
6.12.1 You must set up the APN of your local GSM network for the SIM card in
tracker first before using this function, if there is user name and password for GPRS
login, Please refer to 6.35.1 & 6.35.2 section of this manual to configure the APN, user
name and password for GPRS login.
login, Please refer to 6.35.1 & 6.35.2 section of this manual to configure the APN, user
name and password for GPRS login.
6.12.2 After configure the APN, send "address+password" to device, it will reply SMS
including real street/address name. For example: No.113, Guankou 2nd Rd, Nantou,
Nanshan district, Shenzhen, Guangdong, china.
Nanshan district, Shenzhen, Guangdong, china.
6.13 Location based service (LBS) / Cell-ID Locating
If the tracker cannot establish a solid GPS Fix, it will calculate its location using
Cell-ID GSM locating, Location reports will include the GPS coordinates of the last
known positions as well as a LAC code, Entering the LAC code to the “Manual
Track” menu of web tracking platform www.gpstrackerxy.com will enable you to see
the tracker’s current location. You can also send command “address+password” to the
tracker to request exact address, track will automatically switch to tracking by LBS in
GPRS mode. Accuracy of LBS depends on the distance to the nearest GSM Network
Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM
network. It may not be available in some areas.
Cell-ID GSM locating, Location reports will include the GPS coordinates of the last
known positions as well as a LAC code, Entering the LAC code to the “Manual
Track” menu of web tracking platform www.gpstrackerxy.com will enable you to see
the tracker’s current location. You can also send command “address+password” to the
tracker to request exact address, track will automatically switch to tracking by LBS in
GPRS mode. Accuracy of LBS depends on the distance to the nearest GSM Network
Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM
network. It may not be available in some areas.
6.14 Monitor
6.14.1 The command to switch between Tracker mode and Monitor mode are “tracker” and
“monitor”.The default mode is “tracker” (Track mode).
6.14.2 Send SMS “monitor+password” to the unit, and it will reply “monitor ok!” and
switch to “monitor” mode.
6.14.3 Send SMS “tracker+password” to the unit, and it will reply “tracker ok!” and switch
to “tracker” mode.