Inkmachines Sweden AB TPS-500 Manuale Utente
Instruction
InkMachines
TPS-500
Rev 3.0 / 2018-05-25
17 (27)
The Neorail is only intended for use with Neo-Cartridge tattoo needle. To get the Neorail up running
follow the steps below:
follow the steps below:
1. Connect the Neorail to the power supply unit
with the supplied USB cable.
2. Prepare the Neorail as described in chapter
on page 25
3. When Neorail is connected the apperance of
the display on the main unit changes. In the
lower row of the display the setting of voltage
for each Neo-Cartridge (tattoo needle) is now
displayed. The setting of voltage for active
Neo-Cartridge is highlighted.
lower row of the display the setting of voltage
for each Neo-Cartridge (tattoo needle) is now
displayed. The setting of voltage for active
Neo-Cartridge is highlighted.
4. Each Neo-Cartridge has its own setting of
voltage. This is changed with the arrow keys
(up + or down -).
(up + or down -).
5. Just remove (and use) one Neo-Cartridge at a
time from the Neorail.
6. To avoid cross-contamination when changing
Neo-Cartridge – do not touch the part of the
Neo-Cartridge which should be inserted into
the tattoo machine.
Neo-Cartridge which should be inserted into
the tattoo machine.
1Ø.1V
10.0 10.0
10.1
10.0 10.6 13.0
3
5
1Ø.ØV
10.0 10.0 10.1 10.0 10.6
5
3
3
+
-