Polygroup Limited CW003 Manuale Utente

Section 3

Section 2

Section 1

90S

80S

100S

100S

80S

50S

50S

Open the

protective

cover

Open the

protective

cover

Control box

a.

When using electrical products, basic precautions should 

always be followed, including the following:

b.Do not use seasonal products outdoors unless marked 

suitable for indoor and outdoor use. When products are 

used in outdoor applications, connect the product to a 

Ground Fault Circuit Interrupting (GFCI) outlet. If one is not 

provided, contact a qualified electrician for proper installa-

tion.

c. This seasonal product is not intended for permanent 

installation or use.

d.Do not mount or place the product near gas or electric 

heaters, fireplaces, candles, or other similar sources of 

heat.

e.Do not secure the wiring of the product with staples or 

nails, or place on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.
g.Unplug the product when leaving the house, when 

retiring for the night, or if left unattended.

h.This is an electric product and not a toy! To avoid risk of 

fire, burns, personal injury and electric shock it should not 

be played with or placed where small children can reach it.

i.  Do not use this product for other than its intended use.
j.  Do not hang ornaments or other objects from cord, wire, 

or light string.

k.Do not close doors or windows on the product or exten-

sions cords as this may damage the wire insulation.

l. Do not cover the product with cloth, paper, or any material 

that is not a part of the product when in use.

m.This product has a polarized plug (one blade is wider than 

the other) as a feature to reduce the risk of electric shock. 

This plug will fit in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse the plug. If it 

still does not fit, contact a qualified electrician. Do not use 

with an extension cord unless plug can be fully inserted. 

Do not alter or replace the plug.

n.This product is equipped with push-in type lamps. Do not 

twist lamps.

o.This product employs overload protection (fuse). A blown 

fuse indicates an overload or short-circuit situation. If the 

fuse blows, unplug the product from the outlet. Also 

unplug any additional strings or products that may be 

attached to the product. Replace the fuse as per the user 

servicing instructions (follow product marking for proper 

fuse rating) and check the product.

p.Read and follow all instructions that are on the product

    or provide with the product.

q.

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the

              stand on the floor.
Step 3. Slide the locking disk of the tree stand (D) down

              until it snaps into place.

---Set up and light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom (C) 

             and insert the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B) 

             and insert the pole into the tree bottom (C) .
Step 3.Insert the tree top (A) into the tree center (B).
Step 4.Shape the branches to your preference by working

             from the bottom to the top. When adjusting 

             branches, ensure that all wires are free of branch

             hinges.
Step 5.Insert the green label extension cord plug into the 

             wall outlet. All your lights should now be lit.
Step 6.When finished shaping the branches, slightly 

             upsweep all branch tips for a uniform look.

Part                        Description                                Quantity

A                        Tree top, tag 3                                   1
B                     Tree center, tag 2                                 1
C                    Tree bottom, tag 1                               1
D                           Tree stand                                        1