ShenZhen Link-Create Technology Co. Ltd. PD20 Manuale Utente

2-4. Download, Installation & Uninstallation for Apps

Download

Connect the WIFI, press “Market” for download the APK.

Installation

First, copy the APK to the file on the system, press the “ES File Explorer”, press the APK file for

installation. When complete the installation, the icon will appear on the main desktop.

Note: the first time installation, the message “install blocked” may pop-up, in this case, press

“setting”, then into “security”, tick the unknown sources, and then go back to “ES File Explorer”

to continue for installation.

Uninstallation

Press “setting” and into “Apps”, choose the one you wish to uninstallation.

-5-

2-5. HDMI HD video output

This unit can support 1920 x 1080 HD video play and output.

Press “setting”, “display”, ‘output setting”, choose “HDMI” in the “output type”, setting the display to

be HDMI format to complete the HDMI output to the display. Please use the HDMI cable to connect the

display to the unit.

Note: when exit the HDMI output, change to the “LCD” mode, otherwise the unit will not be able

to the standby status.

-6-

2-6.Connect to the computer

Please make sure the unit is on, using USB cable to connect to the PC. Press “turn on

USB storage”, then press “ok” to complete the connect with the PC.

Note: if do not connect properly, the unit will not appear the message of “turn on USB storage”

-7-

2-7. Charging

Use the power adaptor to connect to the dc jack for charging. During the period of charging, when the

unit is off, will appear the icon ‘charging”, when the unit is on, the battery icon will flicker.

Note: this unit does not support charge thru connecting to the PC.

3. Frequently asked questions

3-1. The unit cannot boot？

Check power level of the unit, please charge it before booting. If the unit still cannot be booted,

you may reset the unit before you boot.

3-2. No sound from speaker.

Check if volume is set to mute mode, please increase volume or unmute. Press “settings” icon”Æ

press “Sound” Æ press “mute mode” and choose “OFF”.

3-3. WIFI connection cannot access the network.

The unit do not search WIFI signal, please press “SCAN”, and make sure that have any wireless

router opened within 10 meters. If the WIFI still cannot search, please reboot the unit again and turn on

the WIFI.

-8-