ELAD srl FDM-DUO Manuale Utente
ELAD FDM-DUO
User Manual Rev 1.04 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
16
6.1.2 Antenna Tuning Mode
In VFO or MEM mode, apply a long pressure on key to switch to the Antenna Tuning Mode
In this mode a tone at the transmission frequency is generated. Use E2 to modify the transmission
power.
The antenna tuning mode have a default timeout of 10s, this value can be modified in the settings menu
50 “TUNE TIME”. However you can apply a long pressure on key to exit from the antenna tuning
mode.
Note:
The timeout is not active if:
The transmission selected transmission output is set to 0dBm
The “SERVICE MODE” is active