ELAD srl FDM-DUO Manuale Utente
ELAD FDM-DUO
User Manual Rev 1.04 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
19
6.2
MEM Mode
6.2.1 Receive
To activate the memory mode, apply a long pressure on the button
6.2.1.1
Select and edit a memory
Use the main knob to select a memory. Apply a long pressure on the main encoder to enter the edit
memory menu. In this menu it is possible to modify the selected memory frequency in digit by digit
mode.
memory menu. In this menu it is possible to modify the selected memory frequency in digit by digit
mode.
Use the button to select the VFO-A/B. This is useful if you want to set the memory settings to a
specific VFO.
6.2.1.2
Delete a memory
Apply a long pressure to the key to enter the delete menu.
Use the E2 knob to set yes or no and make a short pressure on E2 to confirm.
6.2.1.3
Set memory to VFO
Use the key to set the selected VFO to the selected memory frequency and mode. When this
function is used, the FDM-DUO automatically switches to the VFO mode
function is used, the FDM-DUO automatically switches to the VFO mode