ELAD srl FDM-DUO Manuale Utente
ELAD FDM-DUO
User Manual Rev 1.04 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
67
9.2.2 TX modulator firmware update
Download the latest version of the TX modulator firmware.
Replace the file fdmduotx.bin in the USB pen provided with the FDM-DUO.
Connect the provided USB pen to the FDM-DUO TX Micro-USB programming port using the provided
micro-USB.
Connect the power supply, keep pressed the TX program mode button and power up the FDM-DUO.
Replace the file fdmduotx.bin in the USB pen provided with the FDM-DUO.
Connect the provided USB pen to the FDM-DUO TX Micro-USB programming port using the provided
micro-USB.
Connect the power supply, keep pressed the TX program mode button and power up the FDM-DUO.
Keep pressed the TX program mode button until the red led turns on.
Release the TX program mode button.
Wait until the red led turns off.
Turn off the FDM-DUO, disconnect the USB pen and restart the FDM-DUO.
If during the firmware update the green leds are blinking quickly, it means that the programming
process is failed. In this case contact the technical assistance.