ELAD srl FDM-S2 Manuale Utente
ELAD FDM-S2
User Manual Rev 1.03 05/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
3
2 FDM-S2 Overview
2.1 Sampler Exploit
FDM-S2 is the second born device in our ELAD SDR SAMPLER line. This product line is developed to give
the user the possibility to exploit and study the capability of Sampling technique.
With 122.88MHz sampling frequency FDM-S2 can offer the possibility to be a good HF and 6m receiver,
but also allow to receive FM Band and part of VHF Band simply adding appropriate pre-selection filters
in the front-end of ADC.
Some users of FDM-S2 already exploit the under-sampling technique to use it as pan adapter tuning it at
IF frequencies of 68-70 MHz of their transceivers, while others use it to monitor the spectrum of a
particular known frequency.
the user the possibility to exploit and study the capability of Sampling technique.
With 122.88MHz sampling frequency FDM-S2 can offer the possibility to be a good HF and 6m receiver,
but also allow to receive FM Band and part of VHF Band simply adding appropriate pre-selection filters
in the front-end of ADC.
Some users of FDM-S2 already exploit the under-sampling technique to use it as pan adapter tuning it at
IF frequencies of 68-70 MHz of their transceivers, while others use it to monitor the spectrum of a
particular known frequency.
2.2 Front Panel Description
Power Led
Turns on when the receiver is connected to a USB port of the PC and it is switched on
Communication Led
Shows the communication between the receiver and the PC