Shenzhen Belter Health Measurement and Analysis Technology Co. Ltd. 655B4 Manuale Utente

80x125mm   Innotech IB655 - EF655B4 Manual 

3-inch Hidden LED Display

Tempered Glass Surface

ITO Electrode Coating

Calculating measurement results. Please stand still 

until body fat is displayed. 

Overload notification. This message will be displayed when 

exceeding the maximum weight capacity. Kindly step back 

on the scale to obtain weight measurement.

Zero.This message will be displayed upon the 

initialization or changing of batteries.

Low battery. Please replace the batteries.

Measure

-ments

Pounds

Percentage

Bluetooth indicator

Kilograms

Model: Innotech IB-655 Bluetooth Smart Scale 

Dimensions: 320 x 320 x 25mm

Net weight: 4.4lb

 (2kg)

Power: DC 6V 

6WRUDJHWHPSHUDWXUH³ƒ)³ʝ
Working current: 

≦60mA

Batteries: AAA battery X 3

Automatic shut-off: 30+/-3 seconds

Bluetooth: BLE 4.0

Age: 18—80 years old

(*Only weight will be measured for users under age of 18)

Weight: 5.5—397 LBS / 2.5—180 KG

Weight increment: 0.2 LBS / 0.1 KG

Height: 3 ft 2 in—7 ft 2 in / 100—220 cm

Body fat: 5.0%—45.0%

Body fat increment: 0.1%

Water: 35.0%—75.0%

Water increment: 0.1%

Muscle: 46—298 LBS / 21.0—135.0 KG

Muscle measurement increment: 0.2 LBS / 0.1 KG

BMR: 700—3000 KCAL

Vesceral Fat: 1—59

Bone mass: 2.2—8.8 LBS / 1—4 KG

Bone increment: 0.2 LBS / 0.1 KG

Protein: 5.0%—29.0%

BMI: 5—90.0

BMI increment: 0.1

Family member capacity: 10

Bluetooth Smart Scale Instructions

Model: IB-655

support@myinnotech.com

+1 832.964.5182

www.myinnotech.com

You can clean your scale using a wet cloth. Use mild dish soap if necessary. 

Dispose of this device in accordance with your local regulations. Batteries 

should be disposed of separately from household waste. 

Innotech uses bioelectric Impedance Analysis to measure body fat, 

which sends an extremely low electrical current through the body when 

taking a measurement. This low electrical current is unnoticeable and is 

safe for individuals. 

- We do not recommend that anyone with a pacemaker, electrocardio-

graphs and/or other medical devices implanted in the body or used for 

life support use the Innotech because of this electrical current. 

- We advise any pregnant women to consult their physician before using 

the Innotech - not because any harm is likely to occur, but simply 

EHFDXVHHDFKSHUVRQ·VERG\LVXQLTXHDQGLWLVZRUWKDVNLQJDGRFWRU
about your specific situation before making such decisions. 

- Athletes and fitness enthusiasts: Athletes have different body types. 

Scales using only foot electrodes sensors are known to overestimate it 

in leaner people. 

- Under 18 years old: Only weight is available for young people under 

18, because they are growing too fast and their body data is changing 

WRRIUHTXHQWO\

This device complies with part 15 of the FCC Rules.  Operation is 

subject to the following two conditions: (1) this device may not cause 

harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Changes or Modifications not expressly approved by the party 

UHVSRQVLEOHFRXOGYRLGWKHXVHU·VDXWKRULW\WRRSHUDWHWKLVGHYLFH

127(7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKH
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

KDUPIXOLQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQW
JHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRW
installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation.

,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQ
UHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQG
on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

-- Reorient or relocate the receiving antenna.

,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWR
which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

3OHDVHGR127SDLUWKHVFDOHIURP\RXUVPDUWSKRQH·V%OXHWRRWKPHQX
Install and open the Innotech app and then follow the on-screen 

instructions to pair the scale with your smartphone. 

Click the "Pair Device" button on the top right of the app if you have 

another scale to pair. The "Pair Device" button only pop up if the app 

detect another Innotech Bluetooth Smart Scale.

Please unpair your scale from Me- settings, and pair the scale again. 

You may need pair the new scale after you unpair the previous scale. 

The app can only pair one scale at a time.

Please check if the batteries are installed correctly or change new 

batteries.

Please stand still. The scale might need to be re-calibrated to show 

accurate readings. To do this, please put the scale on a hard, flat 

VXUIDFHOLNHWLOHV6WHSRQDQGRIIWKHVFDOHTXLFNO\WKHVFDOHZLOOVKRZ
0.0 lbs. This indicates calibration is complete. 

Your feet may too dry. Please wipe your feet with a damp cloth, keeping 

them slightly damp and try it again.

,QQRWHFK
Scale

Search for “Innotech Scale” in App Store(iOS) or Google Play(Android). 

Download the “Innotech Scale” application from Play Store (Android) 

or App Store (iOS).

Register through the Innotech app following application prompts to 

completion.

Install the batteries and place the scale on a hard flat surface.

Follow the instructions in the app and pair the scale with your phone.

Step on and off the scale to activate it.

After paring, step on the scale barefoot, and start weighing.

1

2

3

4

5

6

'RQRWSDLUWKHVFDOHIURP\RXUVPDUWSKRQH·V%OXHWRRWKPHQX8VH
        the Innotech application to pair the scale with your smartphone. 

        Make sure the batteries are correctly installed. Replace the batteries 

        if necessary. 

        Fully exit your mobile application and reopen it. 

        Disconnect Bluetooth and reconnect again.

1

2

3

4

When the screen illuminates, open the battery compartment located on 

the back of the scale, press the button inside to switch unit between 

pounds and kilograms. 

Button to change measuring unit

Bluetooth connection is necessary to capture and record all data. 

Please install the Innotech App and log in, open the app, pair the scale, 

and step on the scale with bare feet. The app should show all data. 

This could be happening for other reasons. Please try below 

troubleshooting solutions too: 

a. Clean the scale surface and feet. The scale surface is not clean or 

WKHXVHU·VIHHWDUHWRRGU\WREHPHDVXUHG3OHDVHFOHDQWKHVFDOH
surface or wet your feet with a damp towel and try again.

b. Check the age settings. The app will only measure and track users 

age 18 and above. Teenagers under 18 are growing fast and their body 

GDWDLVFKDQJLQJIUHTXHQWO\RQO\ZHLJKWFDQEHPHDVXUHGDQGWUDFNHG

c. Make sure there is direct contact between the scale surface and the 

XVHU·VIHHW3OHDVHGRQRWZHDUVRFNVRUVKRHVDQGUHPHPEHUWR
remove the plastic film from the scale surface. 

G'RQ·WVWHSRIIWRRVRRQ7KHZHLJKLQJSURFHVVLVQRWILQLVKHGXQWLOWKH
progress bar on the display screen totally completes from left to right. 

You may go to “Me” - “Edit” and check if your personal information set 

up in the app is correct. i.e. Gender and Body Type (Normal/ Athlete). 

Also, the numbers you see on your scale may vary from those you see 

using other measurement methods, and professional medical 

instruments. This is normal. Innotech is a home use scale for reference. 

Innotech scale uses BIA (bioelectric impedance analysis), which is a 

commonly used method for estimating body composition, and in 

particular body fat. The bioelectrical impedance analysis (BIA) method 

is a lower-cost (from less than one to several hundred US dollars) but 

less accurate way to estimate body fat percentage. 

It is normal for the three index to add up to more than 100% since water 

is contained in the fat and muscle.

Yes, Innotech app syncs with Apple Health, Ftibit and Google Fit. 

Please turn on Connect to apple health/Google fit/ Fitbit from Me—User 

settings. For iPhone, Fitbit will sync latest data only if you fully exit Fitbit 

(double click home button and swipe with finger up) then reopen Fitbit.

The scale supports up to 10 user profiles. Each user can use their own 

smartphone or share one app and create profiles in Family Manage-

ment. If they only have their individual profile in the app, the scale will 

only sync their data to their individual device. Other member users will 

not have access to your data unless you permit them to add your profile 

to their app. Users can use their personal smartphone and app/account 

to maintain privacy. 

The scale includes Three AAA batteries that are not rechargeable, and 

normally last three to six months. However, rechargeable batteries also 

work for Innotech scales. 

The waterproof level is IPX-3, which is protected against water spraying 

up to 60 degrees from vertical at 10 liters/min at a pressure of 

80-100kN/m2 for five minutes.