Shenzhen Belter Health Measurement and Analysis Technology Co. Ltd. JK1V Manuale Utente

Pagina di 86
6
  Thedevicetest results are for reference only. The results cannot be used as a 
diagnosis. 
  Be sure to properly connect all cables to the device. 
  Keep device packaging away from children and properly dispose of unwanted 
packaging in accordance with current waste control regulations.
Cleaning 
Blood pressure cuffs are listed as low-risk and non-critical items for disinfection. 
That being said, recent research has found them to be key in the spread of MRSA (an 
antibiotic-resistant bacteria) in hospitals. The proper cleaning of these cuffs ensures 
that dangerous bacteria does not spread between patients. Endothelix does not 
assume responsibility for the effectiveness of these chemicals as a means of control 
of infectious diseases. Follow Guideline for Disinfection and Sterilization in 
Healthcare Facilities published by United States Center for Disease Control.  
Cleaning the Cuffs 
1.  Prepare amild detergentand distilled water solutionand a 10% bleach 
solutioninseparate spray bottles. 
2.  Spray detergent solution on cuff, tubing and hose. 
3.  Wipe smooth surfaces with a soft cloth. Use a soft bristle brush on visibly 
soiled areas and irregular surfaces;  
Note:  Do not allow fluid to enter the cuff tubing or cuff. 
4.  Rinse with distilled water. 
5.  To disinfect, spray 10% bleach solution on cuff and allow to sit for 5 minutes 
6.  Wipe excess solution and rinse with distilled water. 
7.  Let dry thoroughly for 2 hours.  
 
Indication of Use 
VENDYS
®
 is a non-invasive, digital, electronic thermometer and non-invasive blood 
pressure measurement device.This device is used to continuously and simultaneously 
measure surface temperature at multiple sites (e.g. fingertips on the test and control 
hands) and also measure blood pressure at the brachial artery. 
It is intended to be used for measurement of vascular reactivity by monitoring 
temperaturechanges before, during, and after a reactive hyperemia test, using a 2-5 
minute cuff occlusion procedure, and calculates multiple indices based on 
temperature changes.