Class and Culture LLC BTJET01 Manuale Utente

AudioJets Quickstart Guide

AudioJets Quickstart Guide

Welcome to the world of wireless with AudioJets 

Bluetooth Headphones. This Quickstart guide will help 

you familiarize yourself with your new headphones to 

keep you moving with your busy life.

1. Introduction ............................................
2. Kit Contents ............................................
3. Connection Diagram ...........................
4. How to use .............................................

4.1 General Function .............................
4.2 Pairing to mobile phone .................
4.3 Charging your device ....................

5. Technical Specification ........................
6. Service and Support .............................

1
1
2
2
2
3
5
5
6

Please follow the rules depicted in this manual 

closely to ensure your safety. Before using your 

new AudioJets Headphones, we strongly 

encourage you to read through this user manual.

Be cautious for any sharp edges, uneven surfaces, 

metal parts, accessories or product packaging 

that could cause potential harm or injury.

Do not attempt to modify, repair or dismantle 

AudioJets Bluetooth Headphones in any manner. 

Doing so will void the product warranty and may 

result in fire, electrical shock, or permanent 

damage to your headphones.

Do not use any volatile liquids to clean your 

AudioJets Headphones.

Do not use AudioJets Headphones in any 

potentially hazardous locations or environments.

1.

2.

3.

4.

5.

1x AudioJets Bluetooth Headphones

1x USB Charger

1x Quickstart Guide

AudioJets Quickstart Guide

AUDIOJETS BLUETOOTH HEADPHONES

QUICKSTART GUIDE

Volume Up

Volume Down /

Transfer voice call

Turn On & Turn Off /

Enter pairing mode /

Play & Pause /

Answer and End Call /

Reject Call 

Mic

Charging

Next

Next

Previous

Turn On

Press the “ ” button for 3 seconds when the 

device is off. (A blue LED slowly flashes and 

a tone will beep to indicate device is on)

While powered off, press the “ ”button 

and hold for 6 seconds. (Blue and Red 

LEDs will flash rapidly with two beeps)

In Pairing Mode, use a Bluetooth enabled 

mobile phone or device to pair together. 

See section 4.2 for detailed instructions.
Press “ ” to play when the device is 

paused and press “ ” to pause when the 

device is playing.

Press “+” to raise volume.

Enter Pairing

Mode

Pairing

Play / Pause

Volume Up

Required Action
Press “-” to raise volume.

Volume Down

Press “<” for previous track.

Previous

Press “>” for next track.

Next

A red LED will flash periodically with a 

beep to indicate low battery.

Low Battery 

Warning

Plug Micro USB into headphone, red LED 

will indicate the device is charging.

Charging

Press the “ ” button for 1 second to 

answer incoming phone calls.

Answer Call

Press the “ ” button for 3 seconds while 

the device is on. (A series of tones and 

red LED will flash to indicate device is off)

Turn Off

Press the “-” button for 2 seconds to 

transfer the call between the mobile 

device and headphones.

Transfer Voice 

Call

Press the “ ” button for 1 second to end 

phone call.

End Call

Press the “ ” button for 1 second to end 

phone call.

End Call

To use your AudioJets Bluetooth Headphones, you 

must first pair your headphones with a Bluetooth 

enabled device. Once your headphones are paired 

to a specific Bluetooth enabled device, they will 

remain paired and will automatically recognize each 

other when they are within range.

Turn on your Bluetooth enabled phone and ensure its 

Bluetooth funcion is activated.

Turn on your AudioJets Bluetooth Headphones to 

pairing mode (see section 4.1 for instructions on 

entering pairing mode).

Search for Bluetooth enabled devices on your phone 

by following phone manufacturer’s instructions. Refer 

to your phone manufacturer’s user manual for more 

information.

After a few seconds, the phone will list the devices as 

a recognized Bluetooth device. Select “AudioJets” 

and follow your phone’s instructions to complete this 

pairing.

Your phone may request a passkey or PIN, please 

enter “0000” as your passkey or PIN.

FCC Warning: 

15.19(a)(3)

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, 

and (2) this device must accept any interference 

received, including interference that may cause 

undesired operation.

15.21

Changes or modifications not expressly approved by 

the party responsible for compliance

could void the user's authority to operate the 

equipment.

15.105(b)

NOTE: This equipment has been tested and found to 

comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are

designed to provide reasonable protection against 

harmful interference in a

residential installation. This equipment generates, uses 

and can radiate radio

frequency energy and, if not installed and used in 

accordance with the

instructions, may cause harmful interference to radio 

communications. However,

there is no guarantee that interference will not occur 

in a particular installation.

If this equipment does cause harmful interference to 

radio or television reception,

which can be determined by turning the equipment 

off and on, the user is

encouraged to try to correct the interference by one 

or more of the following

a.

b.

c.

d.

e.

If your device is not Bluetooth enabled, a Bluetooth 

adapter is necessary. Install adapter (not included) 

with your computer or entertainment device and 

ensure its Bluetooth function is activated.

Turn on device to enter pairing mode.

Open the Bluetooth software installed on your 

computer or entertainment device and select option 

to search for other Bluetooth enabled devices. Refer 

to Bluetooth Software manufacturer’s user manual for 

more information.

After a few moments “AudioJets” will be listed as a 

discoverable device. Select “AudioJets” and 

complete the pairing process.

a.

b.

c.

d.

To charge your AudioJets Bluetooth Headphones, 

connect Micro USB charger to headphones and 

connect universal USB to any USB enabled port or AC 

charger. Ensure that your device is fully charged for at 

least 6 hours before initial use. Red LED will stay lit while 

charging. When charging is complete, LED will 

change from Red to Blue.

Ensure that AC charger or USB enabled port(s) 

are compatible with headphones (USB Type A / 

USB Micro B).

Bluetooth 

Specification

2.1 +EDR

Frequency 

Response

80 Hz - 20 KHz

Loudspeaker 

Output

20mW

Bluetooth Profile

RF Range

10 m

Signal-to-Noise

>90dB

Support A2DP1.2, AVRCP1.0, 

HFP1.5, HSP1.0

Distortion

<1.0%

Playback Time

8 hours

Charging Time

2.5 hours

Weight

110g

Dimenstions

(L X W X H)

156.9 X 163.5 X 49mm

If your device is not performing as it should be, please 

contact Class & Culture by sending an email to 

support@classandculture.com

1

2

3

4

5

6

AudioJets Quickstart Guide

AudioJets Quickstart Guide

AudioJets Quickstart Guide

7

AudioJets Quickstart Guide

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment 

and receiver.

-- Connect the equipment into an outlet on a circuit 

different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV 

technician for help.

RF Exposure Informaion(MPE)

FCC RF warning statement:  The device has been 

evaluated to meet general RF exposure requirement. 

The device can be used in portable exposure 

condition without restriction.

8

AudioJets Quickstart Guide

H2

说明书

客  户

2013-06-14

Suesan

R1.0

技术要求：

物料编号：513-0230-
物料描述：H2说明书\Audiogets