Manualsbrain.com
  1. Manuali
  2. Marche
  3. Sharpvision
  4. WT434
  5. Manuale Utente

Sharpvision WT434 Manuale Utente

Scarica
Pagina di 7
- 1-
1. Precautions
Storage and Keeping
1. Do not expose the device to excessive heat or cold.The storage temperature of this device is
    -30~+80
O
C,and the operating temperature is -20~+70
O
C.The humidity is Rh90﹪.
2. Avoid dropping or striking this device.
3. Avoid using this device in enclosed spaces,areas with excessive vibration or subject to 
    severe impacts.
4. Do not place cables where they may be pinched or stepped on.
5. The device is designed to be water-resistant,but not for underwater application.
Operating Precautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
2. Make sure all cables are connected properly.Observe polarity.Improper cable connections may
    damage the device.Remove the power cable connections when you do not intend to use the unit.
Warning
High voltage is present within the device.The opening of the case should be by professionals.
Special Notice
Never try to repair this device by yourself.In case of any problems,please turn off the device at once 
and notify our company or authorized dealer.
Maintenance
Remove all cable connections from the device before cleaning the unit.
2
1. Remove all the cable connections from the monitor before cleaning the unit.
2. Use a mild household detergent and clean the unit with a slightly damp,soft cloth.
   Never use strong solvents such as thinner or benzine, as they might damage the finish
   of the device.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated  "dangerous 
voltage"
 
within
 
the  product's  enclosure  that  may  be  of  sufficient  magnitude  to 
constitute risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying the appliance.
You are cautioned that any changes or modifications not expressly approved in this manual could 
void your warrantee and neccessitate expensive repairs.
CAUTION
This symbol is intended to alert the user not to waste electrical and electronic 
equipment.
  
Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions:
(1) This device may not cause harmful interference. 
(2) This device must accept any interference received, including      
      interference that may cause undesired operation.
Maintenance
11
When auto dim is turned on in dark environment, OSD turns into dim mode for 
dim setting ;  When auto dim is turned on / off in bright environment, OSD display
normal mode.
 PICTURE
DIM BRIGHT
DIM CONTRAST
DIM COLOR
VOLUME
AUTO DIM
SCALE ADJUST
40
45
40
50
ON
OFF
Press     to select SCALE ADJUST.
PICTURE
BRIGHT
CONTRAST
COLOR
VOLUME
AUTO DIM
SCALE ADJUST
 Press +/- to select  
 
or 
 
for scale adjustment↑↓. 
↑↓
   
Exit menu and again press     to display the grid line.
If
   
↑↓ is selected, press +/- to adjust the scale up/down; I f  
Dim mode   
 PICTURE
AUTO DIM
SCALE ADJUST
 
BRIGHT
 CONTRAST
 COLOR
VOLUME
50
50
50
ON
OFF
Normal mode   
50
50
50
50
50
OFF
OFF
is selected,
press+/-to adjust the scale left/right.
↓
↓↓ ↓↓↓↓↓↓
↓
↓↓ ↓↓↓↓↓↓