Rain Bird Corporation NODERFV30 Manuale Utente

Rain Bird® ClimateMinder™ System has the following type of products:  

•  Wireless gateway station: Used to collect sensor readings and transmit the data it receives from 

stations in the network to the server software.  

•  Wireless sensor station: Used to collect sensor readings and share with the server software 

through the gateway station. 

•  Wireless repeater: Used to repeat wireless signal over long distances.  
•  Wireless controller: Used to control irrigation pumps and or valves. 

All of these products include one or more of the RF card described below. 

Sensors are attached to the interface board as follows: 

• 

TH (J1): Brown (left), Green, White, Black (right) 

• 

SDI12 (J10): Excitation (#1/left), Data (#2), Ground (#5/right)  

• 

Set Jumper JP6 (2-3) for all SDI12 Sensors 

• 

AquaCheck (SDI12) (J10): Red (#1/left), Blue (#2), Yellow (#5/right) 

• 

MPS2, 5TE (SDI12) (J10): White (#1/left), Red (#2), Copper (#5/right) 

• 

Sentek (SDI12) (J10): Orange (#1/left), Blue (#2), White (#5/right) 

• 

5TE, GS3 (J11): White (left), Red, Copper (right) 

• 

EC5 (J2): White (left), Red, Copper (right)  

• 

LWS (J3): White (left), Red, Copper (right) -- Set Jumper to 5V 

• 

10HS (J2-J5): White (left), Red, Copper (right) -- Set Jumper to 5V 

• 

Analog Inputs (J2-6): Excitation (left), Data, Ground (right) 

• 

Solar Power (J8): + (left), - (right)  

• 

Battery (J12): + (bottom), - (top) 

• 

12V Power Out (e.g. for repeater) (J15): - (left), + (right) 

• 

Valve (J9): valve 1/A (#1/left), 2/B (#2) 

• 

Flow (J9): Flow Pulse (#3), Ground (#4/right) 

• 

Pressure Switch (J9): Terminal-1 (#3), Terminal-2 (#4/right) 

• 

Weather:  

• 

Pyranometer (J6): Clear (left), Red, Black (right) -- JP5 (9-10) 

• 

Quantum (J5): Clear (left), Red, Black (right) -- JP4 (9-10) 

• 

Wind (J18) | Rain (J16) 

• 

Relay (J7): NO (left), Common, NC (right) -- JP5 (11-12) 

• 

Jumpers:  

• 

JP1-2: 2.5V Excitation for J2-3 (3-5),  

• 

JP3-4: 5V Excitation for J4-5 (3-5) | 12V Excitation for J4-5 (5-7),  

• 

4-20 mA: JP1-4 (1-2) | 5V Input: JP1-4 (4-6) | 12V Input: JP1-4 (6-8)  

• 

JP6: GSM/RS232 (4-5), 5TE (5-6), SDI12 (2-3) 

 

Below is the block diagram showing the port and jumper numbering.