Guoguang Electric Co. Ltd 00006 Manuale Utente
User Instruction Manual
Amazon Bluetooth Car Kit
logo
INITIAL SETUP
Connect to power and AUX:
1. Insert the cigarette plug & ignition, the plug
1. Insert the cigarette plug & ignition, the plug
power up and showed the green LED.
2. Plug in the 3.5mm plug into car's Aux In
3. Make sure your car stereo is On and set the
input source to AUX In
Decide the Bluetooth receiver location:
• The Bluetooth receiver can place on the car
• The Bluetooth receiver can place on the car
dashboard that in front of the driver or next to
the driver area.
• The microphone is built in the Bluetooth
receiver. So, it is recommend to locate the
Bluetooth receiver as close as your
convenience.
• Locate the Bluetooth receiver in a smooth
and flat surface.
• Make sure the surface is dry and free of dirt.
Located the Bluetooth receiver
• After decide the Bluetooth receiver location,
• After decide the Bluetooth receiver location,
we need to set up the mounting disc to hold
the Bluetooth receiver
• Peel off the back adhesive of the mounting
disc and stick it on the
decided Bluetooth
receiver location
• The Bluetooth receiver
will magnetically attach
to the mounting disc.
TURN ON AND PAIRING
1. Press the Multi-function key once to turn on
the Bluetooth receiver, the Red and Blue LED
will turn on 1 second in the same time, then
it will turn to solid Red and a notable tone.
The receiver will be connect to last device
when powered on.
2. When the receiver power on, press and hold
the multi-function key around 5 seconds to
enter the pairing mode and a notable tone.
3. The Red LED will blink slowly as it is in the
pairing mode.
4. Turn On your BT device and scan, select
“Amazon_BTC1” to connect.
5. The Red LED will stop to blink and the LED
color will change to solid Blue with beep tone
after paired.
6. Then, you can press multi-function key once
to play music in the car audio system from
your Bluetooth device.
7. If you want to turn off the unit, press and
hold the multi-function key by 7 seconds to
power off the Bluetooth receiver. The Red
LED will fast flashing 10 times and the unit
turn off accordingly.
Pairing with a different device
Only one device can be paired in each time. To
Only one device can be paired in each time. To
pair a different Bluetooth device,
• Press and hold the multi-function key around
• Press and hold the multi-function key around
5 seconds to enter the pairing mode, the Red
LED will blink slowly
• Repeat the pairing instruction listed
previously.
PLAYING MUSIC / CALL OPERATION
Play and Pause
• Press the multi-function key to control
• Press the multi-function key to control
Play/Pause of your music after your device
have been paired and playing the music.
• To skip to the next song, double click the
multi-function key.
• When a call is come while you are playing
music, the music will automatically pause.
Incoming call
1. An incoming call when listen music, LED will
1. An incoming call when listen music, LED will
be flashing in Blue color and the ring tone
show in car's speaker system simultaneously.
2. Press the multi-function key once to take the
call, the LED will turn to solid Blue status.
3. You can speak through the microphone of the
Bluetooth receiver
4. If you want to reject the call, long press the
multi-function key by 2 second to reject it,
and the music will be retrieved.
5. You can simply press the multi-function
button to end the call anytime.
6. When a second call is coming during you are in
answering a call, you can simply press the
multi-function key once to answer the second call.
7. While you are in answering two calls, you can
also press the multi-function key to switch
between two calls.
8. To end the second call, simply double press
the multi-function key, you will enter back
the first call.
9. After you end all the calls, the music will be
retrieved.
Voice dialing
• Make a call using voice dialing. If your mobile
• Make a call using voice dialing. If your mobile
device support voice dialing function, press
and hold the multi-function key by 2 seconds
and release, it can wake up the voice dialing
function.
• You can speak through the microphone of the
Bluetooth receiver while you are using voice
dialing function.
• After you end all the call, the music will be
retrieved.
Standby mode
• If the Bluetooth receiver is un-pair more than
• If the Bluetooth receiver is un-pair more than
10 minutes, it will get into standby mode, all
LED off and notable tone.
• You should simply press the multi-function
key to re-activate the Bluetooth receiver, you
will hear a tone at the same time.