Wintec Co. Ltd. MB-100 Manuale Utente
MB-100 Motorcycle Bluetooth Headset
User’s Guide
Power ON / OFF
Press and hold [Power / Intercom Button] about 3 seconds to power on/off.
Volume Adjustment
Momentarily press repeatedly on [Volume + Key] or [Volume - Key] to control volume.
In the case of multi audio mixer, please set volume of MB-100 headset to medium, and adjust
respectively volume in other Bluetooth devices by your comfortable proportion. After finishing
the adjustments, the overall volume is can easily control by [Volume Key] on the headset.
In the case of multi audio mixer, please set volume of MB-100 headset to medium, and adjust
respectively volume in other Bluetooth devices by your comfortable proportion. After finishing
the adjustments, the overall volume is can easily control by [Volume Key] on the headset.
Headset Pairing
◇ Phone Pairing
◇ Phone Pairing
Power on the MB-100 power, please press and hold [Music / Mobile Phone Button] about 6
seconds to go into phone pairing mode and the lights will be flashing Red / Blue. Select the
MB-100 pairing in Bluetooth function of your mobile phone and you will hear the voice
notification if the device is connected successfully.
seconds to go into phone pairing mode and the lights will be flashing Red / Blue. Select the
MB-100 pairing in Bluetooth function of your mobile phone and you will hear the voice
notification if the device is connected successfully.
◇ Intercom Pairing
Power on two MB-100 headsets, please press and hold [Power / Intercom Button] about 6
seconds respectively, and the lights will be flashing Red / Green.
Short press [Power / Intercom Button] on rider’s MB-100 to wait for connection, and the lights
will be changed to Red under the rider pairing mode. After finishing the intercom pairing, you
will hear the voice notification.
seconds respectively, and the lights will be flashing Red / Green.
Short press [Power / Intercom Button] on rider’s MB-100 to wait for connection, and the lights
will be changed to Red under the rider pairing mode. After finishing the intercom pairing, you
will hear the voice notification.
》Bluetooth Function Key / Status Indicator
• Waiting for connection: Blue light flashing.
• Pairing mode: Red / Blue lights flashing.
• Connected: Blue light stays on.
• Waiting for connection: Blue light flashing.
• Pairing mode: Red / Blue lights flashing.
• Connected: Blue light stays on.
》Power ON / OFF
Press and hold for about 3 seconds to ON / OFF.
Press and hold for about 3 seconds to ON / OFF.
》How To Pair Headset
Turn off the Bluetooth control box power (press and hold Bluetooth function key about 3
seconds to turn off Bluetooth). Press and hold for about 6 seconds to go into pairing mode and
the lights will be flashing Red / Blue.
Turn off the Bluetooth control box power (press and hold Bluetooth function key about 3
seconds to turn off Bluetooth). Press and hold for about 6 seconds to go into pairing mode and
the lights will be flashing Red / Blue.
》Clear All Paired Devices
Bluetooth control box can remember two paired headsets, if you need to clear the pairing unit,
with the blue light flashing (wait for link status), hold the Bluetooth button about 12 seconds
until the red light shows for 5 seconds, and then all pairings are cleared.
Bluetooth control box can remember two paired headsets, if you need to clear the pairing unit,
with the blue light flashing (wait for link status), hold the Bluetooth button about 12 seconds
until the red light shows for 5 seconds, and then all pairings are cleared.
Mobile Phone Operation
- Answer a call: Short press [Music / Mobile Phone Button].
- End a call or cancel an outgoing call: Short press [Music / Mobile Phone Button].
- Reject a call: Press and hold [Music / Mobile Phone Button] for 3 seconds.
- Voice dialing: Press and hold [Music / Mobile Phone Button]. (The function supported can
- End a call or cancel an outgoing call: Short press [Music / Mobile Phone Button].
- Reject a call: Press and hold [Music / Mobile Phone Button] for 3 seconds.
- Voice dialing: Press and hold [Music / Mobile Phone Button]. (The function supported can
vary from the mobile phone operator, please refer to the user guide of your mobile phone)
- Redial the last number: Short press [Music / Mobile Phone Button] twice quickly. (If the music
is playing, please pause first.)
Music Sharing
When the MB-100 and your mobile phone connected, you can easily operate the music sharing
function.
- Play the track: Short press [Music / Mobile Phone Button]. (Operate in music pausing)
- Pause the track: Short press [Music / Mobile Phone Button]. (Operate in music playing)
- Repeat to the track: Press and hold [Volume + Key] for 3 seconds. (Operate in music playing)
- Skip back to the previous track: Press and hold [Volume + Key] for 3 seconds. (Operate in
function.
- Play the track: Short press [Music / Mobile Phone Button]. (Operate in music pausing)
- Pause the track: Short press [Music / Mobile Phone Button]. (Operate in music playing)
- Repeat to the track: Press and hold [Volume + Key] for 3 seconds. (Operate in music playing)
- Skip back to the previous track: Press and hold [Volume + Key] for 3 seconds. (Operate in
music pausing)
- Skip forward to the next track: Press and hold [Volume - Key] for 3 seconds. (Operate in music
playing or pausing)
Intercom Operation
When two MB-100 headsets connected, you can easily turn on/off Intercom function.
- Turn on intercom function: Short press [Power / Intercom Button]. (Operate in intercom off)
- Turn off intercom function: Short press [Power / Intercom Button]. (Operate in intercom on)
- Turn on intercom function: Short press [Power / Intercom Button]. (Operate in intercom off)
- Turn off intercom function: Short press [Power / Intercom Button]. (Operate in intercom on)
Radiocom Connected Operation
You can use the extension lead which is specialized for radiocom from our company to connect
the external audio jack on the helmet headset of MB-100. Due to various radiocom adapters,
please contact the local dealers for more information. (The MB-100 can use for the radiocom
under no power supply.)
the external audio jack on the helmet headset of MB-100. Due to various radiocom adapters,
please contact the local dealers for more information. (The MB-100 can use for the radiocom
under no power supply.)
Automatically / Manually Answer Phone Calls
If you want to automatically answer phone calls , please operate the automatically / manually
Answer Phone Calls function. (Factory Default: Manually Answer Phone Calls)
- Turn on Automatically answer: Power on the MB-100, press and hold [Volume + Key] +
Answer Phone Calls function. (Factory Default: Manually Answer Phone Calls)
- Turn on Automatically answer: Power on the MB-100, press and hold [Volume + Key] +
[Volume – Key] for 3 seconds. (Under the manually answer calls)
- Turn off automatically answer: Power on the MB-100, press and hold [Volume + Key] +
[Volume – Key] for 3 seconds. (Under the automatically answer calls)
Voice Notification
MB-100 supports voice notification function, you can use below operation to select
language.
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Volume + Key]
+ [Volume - Key] for 6 seconds to go into switching language voice.
language.
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Volume + Key]
+ [Volume - Key] for 6 seconds to go into switching language voice.
Factory Reset
Please noted that operating the factory reset will clear all paired units and data, which
includes voice notification and automatically answer phone calls.
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Power /
Intercom Button] for 6 seconds, the lights will be flashing Red five times to recover factory
settings.
includes voice notification and automatically answer phone calls.
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Power /
Intercom Button] for 6 seconds, the lights will be flashing Red five times to recover factory
settings.
Size: 76(H)x 42(W)x 23(D) mm
Weight: 44g (Main body)
Bluetooth Core Specifications: Bluetooth 4.1+EDR, Class II
Bluetooth Profiles: HSP / HFP / AVRCP / A2DP
Frequency Range: 2402 ~ 2480GHz
Operating Temperature: -10 ~ +50
Weight: 44g (Main body)
Bluetooth Core Specifications: Bluetooth 4.1+EDR, Class II
Bluetooth Profiles: HSP / HFP / AVRCP / A2DP
Frequency Range: 2402 ~ 2480GHz
Operating Temperature: -10 ~ +50
℃
Operating Time: Usage time of music sharing approx.26 hours. / Usage time of intercom
approx.22 hours.
approx.22 hours.
- Speakers no sounds / Side speaker no sounds: Please make sure the main unit and the
port of helmet lead whether clamp firmly together.
- Speaker low volume: Please make sure the speakers are positioned exactly in line with
your ear. If the speakers are behind your ear, it will cause the volume extremely low.
- Microphone not working: Please make sure the direction of the microphone and the
helmet headset port. (Align the arrows and clamp on)
- Microphone low volume: Please make sure the boom microphone fastened within 1-2cm
in front of your mouth.
Helmet Headset Installation
Please stick the speaker Velcro tapes to the ear pockets inside the helmet. Use the speaker
pads to close your ears if the ear pockets are too deep, and then attach the headset into
position.
pads to close your ears if the ear pockets are too deep, and then attach the headset into
position.
Accessories
Installation Diagram
Alcohol Wipes x1
User’s Guide x1
User’s Guide x1
Controls and Switches
Product Specifications
Troubleshooting
Please remove helmet lining and
stick the microphone Velcro tape to
the helmet inside.
stick the microphone Velcro tape to
the helmet inside.
Please attach the boom microphone into
position and recover the lining.
position and recover the lining.
Please remove helmet lining and stick the microphone Velcro tape in front of the mouth of the
full face helmet, and then fasten the flexible wired microphone into position and recover the
lining.
full face helmet, and then fasten the flexible wired microphone into position and recover the
lining.
Please stick firmly the main
mounting plate on the helmet.
mounting plate on the helmet.
Power / Intercom Button
Status Indicator
Music / Mobile Phone Button
Volume + Key (Volume UP Key)
Volume - Key (Volume DOWN Key)
Power ON / OFF
Bluetooth Function Key
Status Indicator
Bluetooth Function Key
Status Indicator
MR-200 Rider BT (Bluetooth)
Control Box
Control Box
MR-200 Passenger BT (Bluetooth)
Control Box
Control Box
1
1
2
Installation
Remove
Press down.
2
Push up.
Main Unit x1
Speaker Pads x2
Speaker Velcro Tapes x2
Microphone Velcro Tape x1
MINI USB Charging Lead x1
Main Unit Mounting Plate x1
Helmet Headset
Boom Microphone(Open Face Helmet)
Boom Microphone(Open Face Helmet)
Helmet Headset
Flexible Wired Microphone(Full Face Helmet)
Flexible Wired Microphone(Full Face Helmet)
MB-100
MB-100
MR-200 RADIOCOM
Radar Speed
Detector
Detector
Mobile Phone
Navigators
Mobile Phone
Intercom / Radiocom
MB-100 + MR-200 Multi Audio Mixer System
Radar Speed
Detector
Detector
Mobile Phone
MB-100
MB-100
Navigators
Mobile Phone
Intercom
MB-100 + MB-100 Multi Audio Mixer System
Please make sure the speakers are
positioned exactly in line with
your ear, otherwise the volume
performance is limited.
positioned exactly in line with
your ear, otherwise the volume
performance is limited.
Boom Microphone Installation
– Open Face Helmet
– Open Face Helmet
*Helmet Headset. (The headset type is
determined from the local dealer.)
determined from the local dealer.)
Please keep the boom
microphone fixed to the
helmet, and adjust it to
align within 2 cm in front
of the mouth.
microphone fixed to the
helmet, and adjust it to
align within 2 cm in front
of the mouth.
Please keep the boom
microphone fixed to the
helmet, and adjust it to
align within 2 cm in front
of the mouth.
microphone fixed to the
helmet, and adjust it to
align within 2 cm in front
of the mouth.
Please make sure the main headset
and the port of lead firmly together to
avoid the water damaged.
and the port of lead firmly together to
avoid the water damaged.
Concave is outside.
Flexible Wired Microphone Installation - Full Face Helmet
Main Mounting Plate Installation
Clamp the Main Unit and the Port of
Headset Lead Together
Headset Lead Together
Clamp the Main Unit to the Mounting plate
◇ Navigator Pairing
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Volume + Key]
about 6 seconds to go into the navigator pairing mode and the lights will be flashing Blue.
Select the MB-100 pairing in Bluetooth function of Navigator and you will hear the voice
notification if the device is connected successfully.
about 6 seconds to go into the navigator pairing mode and the lights will be flashing Blue.
Select the MB-100 pairing in Bluetooth function of Navigator and you will hear the voice
notification if the device is connected successfully.
◇ Radar Speed Detector and Other Bluetooth Device Pairing
Power on the MB-100, please press and hold [Music / Mobile Phone Button] + [Volume - Key]
about 6 seconds to go into the radar speed detector and other Bluetooth device pairing mode
and the lights will be flashing Red. Select the MB-100 pairing in Bluetooth device and you will
hear the voice notification if the device is connected successfully.
about 6 seconds to go into the radar speed detector and other Bluetooth device pairing mode
and the lights will be flashing Red. Select the MB-100 pairing in Bluetooth device and you will
hear the voice notification if the device is connected successfully.
◇ MR-200 Radiocom Pairing
Power on the MB-100, please press and hold [Power / Intercom Button] about 6 seconds to go
into MR-200 Radiocom pairing mode and the lights will be flashing Red / Green. Set the MR-200
Bluetooth Control Box to go into pairing mode, and you will hear the voice notification if the
device is connected successfully.
into MR-200 Radiocom pairing mode and the lights will be flashing Red / Green. Set the MR-200
Bluetooth Control Box to go into pairing mode, and you will hear the voice notification if the
device is connected successfully.
PK RP01 VER.1
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.