LEEDARSON LIGHTING CO. LTD. 5AA-GW-ZB-H0 Manuale Utente
RESET KEY: Press reset key to clean up all setting parameter. After
reset, you need connect gateway to router and launch searching to
add devices to gateway.
reset, you need connect gateway to router and launch searching to
add devices to gateway.
PAIR KEY: Press pair key to launch searching and connecting those
un-pairing bulb/sensor devices. Gateway will open to search and add
devices about 1 minutes. If you press pair key during the searching
step, it will stop the searching process. Please launch searching
process firstly and then turn on bulbs for ZLL bulbs.
un-pairing bulb/sensor devices. Gateway will open to search and add
devices about 1 minutes. If you press pair key during the searching
step, it will stop the searching process. Please launch searching
process firstly and then turn on bulbs for ZLL bulbs.
POWER LED: Power indicator , blinking during the gateway
searching time.
LAN LED: LAN indicator, turn on upon connecting to router
successfully.
WAN LED: WAN indicator, turn on upon connecting to cloud service.
Micro USB connector: Connect to the external power adapter by
Micro USB connector: Connect to the external power adapter by
USB cable.
RJ45 Ethernet port：Connect to router by Ethernet CAT. 5E cable.
GATEWAY instruction
POWER
LED
LED
LAN
LED
LED
WAN
LED
LED