Lutron Ketra LLC JA7 Manuale Utente
Title
Ketra VER003 2.4GHz ZigBee Module - User Manual
Size
A
Ketra Part Number
830-000005-xx
Rev
A
Date
May 12, 2014
Sheet
5 of 5
AGENCY CERTIFICATIONS
FCC Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may
cause undesired operation.
cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by Ketra could void the user's authority
to operate the equipment.
to operate the equipment.
20 cm Separation Distance
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
OEM Responsibility to the FCC Rules and Regulations
The VER003 2.4GHz ZigBee Module has been certified per FCC Part 15 rules for integration
into products without further testing or certification. To fulfill the FCC certification
requirements, the OEM of the Module must ensure that the information provided on the
Label is placed on the outside of the final product. The Module is labeled with its own FCC
ID Number. If the FCC ID is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AB3CJA7” or “Contains FCC ID: 2AB3CJA7”
into products without further testing or certification. To fulfill the FCC certification
requirements, the OEM of the Module must ensure that the information provided on the
Label is placed on the outside of the final product. The Module is labeled with its own FCC
ID Number. If the FCC ID is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AB3CJA7” or “Contains FCC ID: 2AB3CJA7”
The OEM of the VER003 2.4GHz ZigBee Module must only use the approved antenna, (PCB
Trace Antenna) that has been certified with this module. The OEM of the VER003 2.4GHz
ZigBee Module must test their final product configuration to comply with Unintentional
Radiator Limits before declaring FCC compliance per Part 15 of the FCC rules.
Trace Antenna) that has been certified with this module. The OEM of the VER003 2.4GHz
ZigBee Module must test their final product configuration to comply with Unintentional
Radiator Limits before declaring FCC compliance per Part 15 of the FCC rules.