Iconnect 197D Manuale Utente
AC1200R User
’s Guide
- 4 -
1.3 Panel Layout
1.3.1 The Front Panel
The Router’s LEDs and the WPS/Reset Button are located on the side panel (View from left to
right).
Name
Status
Indication
PWR
Off
Power is off.
On
Power is on.
WPS
Slow Flash
A wireless device is connected to the network by WPS
function. This process will last for about 2 minutes.
function. This process will last for about 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function. The LED will light up for about
2 minutes.
network by WPS function. The LED will light up for about
2 minutes.
Quick Flash
A wireless device failed to be added to the network by
WPS function.
WPS function.
LAN
1,2,3,4
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
there is no activity.
Flashing
There is an active device linked to the corresponding port.
WLAN (2.4GHz)
Off
The Wireless function is disabled or not active
Flashing
The Wireless active
WLAN (5GHz)
Off
The Wireless function is disabled or not active
Flashing
The Wireless active
Table 1-1 The LEDs Description
Note:
1. After the device has been successfully added to the network by the WPS function, the WPS
LED will light up for about 2 minutes and then turn off.
2. To reset the router, press the Reset Button and hold for more than 10 seconds.