NINGBO CSTAR IMP&EXP CO. LTD 0039 Manuale Utente
FCC Statement:
SAFETY PRECAUTIONS:
1. Please read all the instructions carefully
before using the product.
2. The unit’s full performance is achieved only
after 2 or 3 completed charge and discharge
cycles.
3. To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
4. Do not expose the device to moisture.
5. Do not use the device in excess of its output
rating. Overload outputs above the rating may
result in a risk of fire or injury.
6. Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
7. Do not disassemble the device. Take it to a
qualified service person when service or repair
is required. Incorrect reassembly may result in
a risk of fire or
8. Do not expose the device to fire or excessive
above 212ºF/100ºC may cause explosion.
9. Have servicing performed by a qualified repair
person using only identical replacement parts.
10. This will ensure that the safety of the product
is maintained.
Bluetooth Set Up:
- Search the possible Bluetooth connections
from a Bluetooth enabled device. Select pairing
name “2696” from list of available devices.
Once selected, the Earbuds will announce
“connected.” You may now play audio.
- Solid Red: Earbuds are being charged
- The red LED will be turned off when charging
completed
LED Indicators:
Technical Specifications:
Model: 2696
Frequency response: 20Hz-20kHz
Built-in 55mAh/3.7V lithium polymer battery in
each earbud
Charging input: 5V/0.055A
It takes 2 hours to recharge from 0 to 100%.
Playback at max. volume: up to 1 hours.
True Wireless Earbuds
2969
What’s included:
2 x True Wireless Earbuds
1. Mode Button
2. LED Indicator
3. Input Port (1)
4. Input Port (2)
1 x USB to Micro-USB charging cable
1 x Instruction Manual
①
②
③
④
- Bring the Earbuds close to your ears so you can
hear the Earbuds’ announcements. Press and
hold the Mode Buttons on both Earbuds, until
you hear “power on”annouced, place the
earbuds beside each other, they will
automatically pair together. One earbud will flash
blue slowly. The other earbud will flash red and
blue, this is the Primary/Left Earbud and will be
what you use to control the functions when using
two earbuds at once.
Once connected, you may press and hold both or
either Earbuds to turn the Earbuds off.
Mode Button Function:
- Primary/Left Channel, press once: Play/Pause,
Accept/Reject call
- Secondary/Right Channel, press once: Play/Pause
-
Phone Functions:
- Under connected mode when phone call
comes in:
Double press the Mode button to reject
Short press to answer
Short press to hang up when finishing the call
- Redial: Double press the Mode button to redial the
last number you called.
This device complies with Part 15 of the FCC
Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful
interference, and
(2)This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
FCC ID : 2ABHA0039
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
(ShenZhen C-Star Electronic Tech. Co., Ltd.) is
under license. Other trademarks and trade
names are those of their respective owners.
Bluetooth Listing Declaration ID: D026370
Note:This equipment has been tested and found
to comply with the limits for a class B digital
device,pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio
frequence energy and,if not installed and used in accordance
with the instructions,may cause harmful interference to radio
communications.However,there is no guarantee that interference
will not accor in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the
user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different
from that to which the receiver is connectec.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF
exposure requirement. The devicecan be used in portable
exposure condition without restriction.