CognitiveTPG LLC 0481402 Manuale Utente

(amber) 

(5 blinks) 

(solid green)

5. Power-on Utilities

There are three power-on utilities to set up and test printer hardware. These utilities are

activated by pressing FEED button( ) then turning on the printer power simultaneously

and release the button at different positions of LED indicator.

Please follow the steps below for different power-on utilities.

1. Turn off the printer power switch.

2. Hold on the FEED button( ) then turn on the power switch.

3. Release the button( ) when LED indicates with different positions for different

functions.

Power on utilities

The positions of LED light will be changed as following pattern:

LED

Functions

(Solid)

(5 blinks)

(Solid green)

1. Media sensor calibration

Release

2. Self-test and enter dump

mode

Release

3. Printer initialization

Release

5.1 Media Sensor Calibration

Please follow the steps below to calibrate the media sensor.

1. Turn off the power switch.

2. Hold on the FEED button( ) then turn on the power switch.

3. Release the FEED button( ) when the indicator becomes

and

blinking. (Any green will do during the 5 blinks)

 It will calibrate the black mark sensor sensitivity.
 The LEDs will be changed as following order: