I/O INTERCONNECT INC. HA815 Manuale Utente

Setting up the HP Wireless Display Adapter

Step 1: Connecting to power

WARNING!

To reduce the risk of electric shock or damage to your equipment:

Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
To ensure the correct performance of all display adapter features, connect the display adapter to a

power source using the included USB cable.

1.

If you are using an electrical outlet, do the following:
a.

Connect the proper plug for your outlet to the power adapter.

b.

Connect the USB 2.0 end of the cable to the power adapter, and then plug the power

adapter into an electrical outlet

If you are not using an electrical outlet, connect the USB 2.0 end of the USB cable to a powered

USB port.

2.

Connect the micro USB end of the USB cable to the display adapter.

Step 2: Connecting to a display device

To connect a display device such as a monitor or projector to the display adapter, determine

whether the device has an HDMI port or a VGA port.

●

If your display device has a VGA port, first connect the display adapter to the HDMI-to-VGA

adapter, and then connect the display adapter to the VGA port on the device.

●

If your display device has an HDMI port, connect the display adapter directly to the HDMI

port on the device.

Step 3: Connecting to a computer or other electronic device

The HP Wireless Display adapter can run in two modes: Miracast/Intel WiDi and presentation mode

(WiFi). You can connect wirelessly to the display adapter using electronic devices such as computers,

tablets, and smartphones. See your device’s documentation to determine whether the device is Intel

WiDi, Miracast, or WiFi capable.

NOTE:

After the display adapter starts up, a home screen on the display device (the remote display)

provides the connection information for the two available modes.
To connect using Intel WiDi:

Run your electronic device’s Intel WiDi software and select the remote display. Then, select

Connect. If necessary, type in the PIN shown on the home screen of the remote display under

Compatible with lntel

®

 Pro WiDi, Intel WiDi / Miracast. See your device's documentation for more

information about creating an Intel WiDi connection.

To connect using Miracast:

Run your electronic device’s Miracast software and select the SSID for the display adapter. See

your device’s documentation for more information about creating a Miracast connection.

Miracast software names include Screen Mirroring, Screencasting, and Wi-Fi Direct.

2

Chapter 1   Getting started