Duravit AG 596000098001 Manuale Utente
14
If the remote control is not available or the batteries are empty then basic functions can also be switched
on or off from the side control buttons.
SensoWash®
on or off from the side control buttons.
SensoWash®
automatically cleans the retracted spray wand when the seat sensor is activated, and both
before and after washing.
Red illuminated: SensoWash®
is in the „Standby mode“, all functions cannot be used.
Remote control
> Push up and pull the battery compartment open.
> Insert three alkaline batteries in the right polarity.
Power supply
>Connect the power supply.
> Push up and pull the battery compartment open.
> Insert three alkaline batteries in the right polarity.
Power supply
>Connect the power supply.
SensoWash® will start self-check when it is connected to the power supply. The self-check takes
about 15 seconds, and during which time, only “Power” button
on the seat unit can work, other
operation (RC command, or push Ladywash/Rearwash on the seat unit) will not be taken by the unit.
[ZP1]