ASKA ELECTRONICS CO. LIMITED X5 Manuale Utente

Operation 

  LED Status 

Power on 

  Blue LED flashes 2 times 

Power off 

  Red LED flashes 2 times 

Pairing 

  Red LED & Blue LED flashes alternately   

Incoming call 

  Blue LED fast flashes 

Low battery 

  Red LED flashes 2 times every 2 seconds 

Charging 

  Red LED on during charging 

  Red LED off charging finished 

X5 BLUETOOTH STEREO HEADPHONE

User Manual

To know more about your  X5  Bluetooth headphone
Features

1, Bluetooth  4.1+EDR

2, 3.5mm music line-in function

3, apt-X® audio technology 

4, Support connecting with 2 phones devices  

5, iOS show the headphone battery power status

6,40mm Speaker

1. Multi function Button

2. LED indicator

3. Vol +

4. Vol –

5. USB slot

6. Charge LED

7. 3.5mm Audio Jack

8. Mic

2, Basic Buttons Operation
Power on:  In power off status, press multi-button 2 seconds to 

turn on the headphone. Blue LED flashes 2 times.

Power off: In power on status, press multi-button for 3 seconds 

to power off headphone. Red LED fast flashes 2 times
Pairing: In power off status, press multi-button for 5 seconds to 

enter pairing mode. Red LED & Blue LED flashes alternately.
Volume adjust: Short press on Vol+ or Vol- buttons, one level 

voice volume changes.
Play/Pause: Short press multi-function button, music pause. 

Press it again, music continues.
Previous: in playing music, press 2 seconds Vol-, music turns to 

previous one.
Next: in playing music, press 2 seconds Vol+, music turns to 

next one.
Answer Call: Short press multifunction button to answer the 

incoming call.
End call: Short press multifunction button, phone call ended.
Reject call: Press Vol+ button for 2 seconds to reject a call.
Transfer call: During the phone call conversation, press Vol+ 

button for 2 seconds, call switches to mobile phone. Press 

multifunction button for 2 seconds again, call switches to 

headphone  
Last number redial: in standby status, continuously press 

headphone multifunction button twice to redial the last number.
Call Mute function:  Press Vol- for 2 seconds, call mute. Press 

Vol- for 2 seconds again, call mute cancel.
Battery Capacity status: When headphone connects to iOS 

devices, iOS devices show the headphone battery power status 

on the upper right corner.
Charging: new headphone has enough power for pairing and 

dialing out for several times. When in low battery, please 

charging via USB cable for 2 hours. Red LED keep lighting 

during charging, Red LED off after charging finished.
Reset Mode: Connect the headphone to computer via Micro USB 

cable. When red LED on, headphone reset finished.
3.5mm music line-in function：Connect Audio cable to 3.5mm 

audio jack for wired music. Phone call function cannot be used in 

this mode. You can adjust volume button of the audio player or 

the mobile phone to reach right volume to listen music.

devices )
Pairing with one phone or other device
In power off status, press multi-button for 5 seconds to enter 

pairing mode. Red LED & Blue LED flashes alternately, Activate 

your phone or device Bluetooth function and search for head-

phone. From the list of found devices on your mobile phone, 

select the headphone “X5” to connect it. Follow the instruction to 

enter “0000” as PIN if the mobile phone reminder to need. 
Pairing with two phones or other devices at the same time

This headphone can support 2 devices multi-connection. It can 

pair with two mobile phones simultaneously, taking the call 

from any of them.

1, Pairing with phone A first, then power off X5 
2, Power on X5 to enter pairing mode，pairing with phone B.
3, In phone A connected list, select X5 to connect, then both 

phone connected with headphone.
4, Sound quality with  apt-X® code

Featuring the apt-X code, the headsets can connect wirelessly to 

any apt-X® enabled devices, vastly improves the quality of 

Bluetooth streaming, delivering CD-quality sound.

1, 1 X Stereo Bluetooth headphone X5

2, 1 X Charging Micro USB Cable

3, 1 X User Manual

4, 1 X 3.5mm audio wire

1, You must choose a qualified charger from a regular manufac-

turer to charge the headphone.

2, you must charge the headphone if it has not been used for 

more than 12 months.

Bluetooth version:  

 

4.1

Talk 

time:   14h 

Stand-by 

time: 

  840h

Music play time:   

 

21h 

Wireless 

range: 

  10m

Bluetooth profiles:  

 

A2DP/ AVRCP/ HSP /HFP

Impedance: 

 

 

32Ω

Sound pressure level:  

 

103±3dB

Frequency Response: 

 

20Hz---20 KHz

Weight: 

   280g

Dimension: 

  180x200x85mm

FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

—

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.
—

Consult the dealer or an experienced radio/TV technician for help.

       The device has been evaluated to meet general RF exposure requirement. The 

device can be used in portable exposure condition without restriction.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device c

an be used in portable exposure condition without restriction.