Sato Vicinity Pty Ltd MDR-4330ATE Manuale Utente
MDR-4330AT (MLC6) USER MANUAL
21
83-00-001-DOC-3
Configuration System “Network Configuration” window
!
Ensure the IP address allocated to the reader is recorded for future reference.
Applying a label to the reader showing the allocated IP address is ideal.
Tip: If you make an error in the reader Network configuration the reader may no
longer be visible on the network (wrong IP range for example). If this happens you
can connect to the reader using a USB cable & correct the issue
can connect to the reader using a USB cable & correct the issue
4. Line Reading
4.1 Line Reading Functionality
All MDR-4330AT readers from MLC 4.1 onward have native Line Reading capability which allows
users to quickly locate a specific item within a large tag population.
How the Line Reading functionality works
users to quickly locate a specific item within a large tag population.
How the Line Reading functionality works
The Line Read functionality is native to the reader and is controlled via the client application software,
the Line Read works in two distinct stages as follows:-
the Line Read works in two distinct stages as follows:-
Stage 1) Initial item location within a large tag population
When searching for a single specific item you may or you may not know the container in
which the item is located, in either situation you will enter the details of the item you are
searching for into your application, this will set the reader to seek mode. If you do know the
container in which the item is located you can simply place the container on the reader & the
reader it will confirm it has identified the RFID tag associated with the item you are searching
for, the reader can now be set to Line Read mode via the application. If you do not know the
container in which the item is located you can simply place your containers on the reader
surface, one by one until the reader confirms it has identified the RFID tag that is associated
which the item is located, in either situation you will enter the details of the item you are
searching for into your application, this will set the reader to seek mode. If you do know the
container in which the item is located you can simply place the container on the reader & the
reader it will confirm it has identified the RFID tag associated with the item you are searching
for, the reader can now be set to Line Read mode via the application. If you do not know the
container in which the item is located you can simply place your containers on the reader
surface, one by one until the reader confirms it has identified the RFID tag that is associated