Wachendorff Elektronik GmbH & Co. KG OPX35 Manuale Utente
Chapter 5 – System Setup
65
5.2.3. Output setup
GPS output refers to the console’s ability to export various data strings
in NMEA 0183 format. The most common of these is the GGA
(Position) message and the VTG (Velocity and Heading) message.
in NMEA 0183 format. The most common of these is the GGA
(Position) message and the VTG (Velocity and Heading) message.
This may be useful to connect to third party devices for position and
speed outputs.
speed outputs.
To set up the GPS output:
1. Select System
/ GPS
/ Output
.
l
VTG legacy mode: Supports VTG data output for NMEA
standards below V4.00. Outputs VTG strings compatible with
NMEA V3 and below.
standards below V4.00. Outputs VTG strings compatible with
NMEA V3 and below.
Refer to documentation provided with third party device for more
information.
information.
Note
: Devices using GPS and plugged into the console may need
information from the console. The information is contained in
sentences based on NMEA.
sentences based on NMEA.
5.2.4. Radar setup
The console can provide radar output to external devices. This may be
useful to connect to a third party device to provide a ground speed
useful to connect to a third party device to provide a ground speed