Wachendorff Elektronik GmbH & Co. KG OPX35 Manuale Utente
5.4. Setting up alarms
68
5.4. Setting up alarms
If no implements have been set up in the system, only General alarms
are available to set up. Implement specific alarms are available once
an implement has been defined. Refer to the Spreader / Sprayer /
Seeder Operator manuals for more information.
are available to set up. Implement specific alarms are available once
an implement has been defined. Refer to the Spreader / Sprayer /
Seeder Operator manuals for more information.
To set up general alarms:
1. Select System
/ Alarms
/ General
.
The list of general alarms is displayed. All general alarms may be
enabled or disabled by selecting All General Alarms.
enabled or disabled by selecting All General Alarms.
Alternatively, each general alarm may be enabled or disabled
independently.
independently.
Note that for safety reasons, the Steering Engage/Disengage audible
alarm may not be disabled.
alarm may not be disabled.
The End of Row alarm requires extra information. This alarm sounds
and displays when the vehicle is approaching the boundary and the
operator should slow down to prepare for manual control.
and displays when the vehicle is approaching the boundary and the
operator should slow down to prepare for manual control.
l
First Distance: Distance from the boundary at which the alarm
will first trigger. Distance is measured from the tractor to the
boundary along the wayline (guideline).
will first trigger. Distance is measured from the tractor to the
boundary along the wayline (guideline).