Ulterius Technologies LLC FDN40 Manuale Utente
CHAPTER 8: IKE
Configuration User Manual
175
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
8.2.5.7.1
For IKEv1
This section lists the CLI configuration steps to configure phase 1 parameters
for the main mode.
for the main mode.
Enter the Global configuration mode.
UltOs# configure terminal
Enter the policy configuration mode.
UltOs(config)# crypto map sa
Set the phase 1 parameters.
UltOs(config-crypto-map)# )# isakmp policy encryption des hash
md5 dh group2 exch main lifetime secs 1500
md5 dh group2 exch main lifetime secs 1500
Exit the policy configuration mode.
UltOs(config-crypto-map)#end
View the configured phase 1 parameters.
UltOs# show crypto map sa
VPN Policy Parameters
-------------------------
Policy Name : sa
Policy Status : Inactive
Policy Type : IKE Pre-shared
Ike Version : v1
Local & Remote Protected N/W's : None <-- --> None
Local & Remote Port Range : 0-65535 <-- --> 0-
65535
65535
Security Mode : Tunnel
Local & Remote Tunnel Term Addr : 0.0.0.0 <== ==>
35.0.0.2
35.0.0.2
Interface Name : Not Configured
Policy Protocol : any
Policy Action : Apply
Anti Replay : Enable
IKE suite Info [PHASE I] :
Encryption Algo : DES
Hash Algorithm : HMAC MD5
Diffie-Hellman Group : DH Group 2
IKE Exchange Mode : Main
Life Time : 1500 Secs
Identity Information :
Local Identity Type : IPv4