Ulterius Technologies LLC FDN40 Manuale Utente
CHAPTER 15: OSPF
`FDN40ConfigUM/20160505
308
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
4. Configure the OSPF interface.
UltOs(config-router)# network 10.4.0.1 area 0.0.0.0
UltOs(config-router)# network 10.10.2.1 area 0.0.0.6
5. Configure the area 0.0.0.6 as an NSSA area.
UltOs(config-router)# area 0.0.0.6 nssa
6. Configure the summary address for 90.0.0.0/8 in the NSSA area.
UltOs(config-router)# summary-address 90.0.0.0 255.0.0.0 0.0.0.6
Delete the summary address configuration for 90.0.0.0/8 in the NSSA area by
executing the following command. UltOs(config-router)# no summary-address
90.0.0.0 255.0.0.0 0.0.0.6
90.0.0.0 255.0.0.0 0.0.0.6
Refer Sample NSSA Configuration, summary address configuration and area-
default cost
15.5.13.5.2
WEB Configuration
OSPF Stub Area can be set to configured through WEB interface using the
OSPF Area Configuration screen (Navigation - Layer3 Management >
OSPF > Aggregation)
OSPF Area Configuration screen (Navigation - Layer3 Management >
OSPF > Aggregation)