Ulterius Technologies LLC FDN40 Manuale Utente
CHAPTER 2: SYSTEM FEATURES
Configuration User Manual
41
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
It is not advisable to change the default VLAN ID when some
configurations are already saved.
configurations are already saved.
Once the default VLAN ID is configured, switch has to be restarted
before saving any configuration.
before saving any configuration.
2.2.10.2 WEB Configuration
Default VLAN Identifier can be configured through WEB interface using the
Factory Default Settings screen. For screenshot, refer section 2.2.1.2
Factory Default Settings screen. For screenshot, refer section 2.2.1.2
2.2.11 Configuring Switch Clock
2.2.11.1 CLI Configuration
Configuring the Clock sets the Switch clock time.
1. Execute the following commands to adjust the switch clock.
1. Execute the following commands to adjust the switch clock.
UltOs# clock set 16:00:00 1 jan 2007
2. View the configured clock by executing the following show command.
UltOs# show clock
Mon Jan 01 16:00:01 2007
2.2.11.2 Web Configuration
Switch Clock can be set through WEB interface using the System
Information screen. For screenshot, refer 2.2.4.2.
Information screen. For screenshot, refer 2.2.4.2.
2.2.12 Enabling/Disabling Console CLI through Serial Port
2.2.12.1 CLI Configuration
1. Execute the following command to enable console CLI through serial
port.
UltOs# cli console
2. View the console CLI status using the following show command.
UltOs# show nvram
Default IP Address : 12.0.0.1
Default Subnet Mask : 255.0.0.0
Default IP Address Config Mode : Manual
Default IP Address Allocation Protocol : DHCP
Switch Base MAC Address :
00:01:02:03:04:01
00:01:02:03:04:01
Default Interface Name : wan0/1
Config Restore Option : No restore
Config Save Option : No save
Auto Save : Enable
Incremental Save : Disable