Axis OfficeBasic USB Wireless Print Server 0208-002 Dépliant
Codici prodotto
0208-002
Windows Setup
AXIS OfficeBasic USB Wireless
13
Windows Setup
This chapter describes how to locate and configure the networked printer in
Windows over
Windows over
Infrastructure mode.
For Ad Hoc installation and configuration, see Appendix 1: Print Server Setup in
Setup in Windows 2003/2000/XP
Before You Start:
1. Insert the AXIS OfficeBasic USB Wireless CD into your CD-drive.
2. Choose
Setup Wizard to install the wireless print server and configure the
connected printer.
3. From the
Select A Print Server screen, select the print server that you want
to configure and click
Next.
• Make sure you have an Access Point in your network and that it has a valid IP
address. Example: 192.168.1.100
• Check that the TCP/IP protocol is installed on your computer.
• Make sure the print server’s DIP switch is in Normal mode (Nor.)
• Make sure the print server’s DIP switch is in Normal mode (Nor.)
The Wizard will automatically install these components in
C:\Program Files\Axis Communications\AXIS OBW Wizard:
C:\Program Files\Axis Communications\AXIS OBW Wizard:
•
AXIS OBW Wizard.exe
•
AXIS OBW Network Printer Port. DLL (Wireless Print Monitor)
After installation, AXIS OBW Wizard will be available from Start | Programs |
Axis Communications.
Axis Communications.
AXIS OBW Wizard will start in the same language as your operating system,
see Technical Specifications, on page 49 for supported languages.
see Technical Specifications, on page 49 for supported languages.