Axis OfficeBasic USB Wireless Print Server 0208-002 Dépliant

AXIS OfficeBasic USB Wireless

23

Preparing for

LPR Printing

In the 

Control Panel, double-click the Network icon. Select the Services tab. If 

the TCP/IP Printing entry appears, then TCP/IP is already installed. Close the 

Network folder and go on to Installing an LPR printer, below.
First, prepare for LPR printing:

1. Open the 

Control Panel and double-click the Network icon. 

2. Select 

Protocols. 

3. Add 

TCP\IP Protocol. 

4. Select 

Services. 

5. Add 

Microsoft TCP\IP Printing.

Installing a Network

Printer

1. Make sure your print server has a valid IP address, see IP Addressing, on 

2. Select 

My Computer and click Next.

3. From the 

Available Ports list, click Add Port.

4. Choose 

LPR Port and click New Port.

5. Type the name of your AXIS OfficeBasic USB Wireless or IP address in the 

Name or address of server providing lpr field (Example: 192.168.3.191). Then 

enter which port to use in the 

field (Example: usb or lp1). Click OK then Close. 

6. The added print server will now appear in the 

Available Ports list. Click Next, 

choose a driver and finish the installation as usual.

This section describes how to set up a Windows 2000/XP server for LPR 
printing, using the built-in Microsoft LPR Monitor, 

Print Services for UNIX.

Basic Setup

If you have not already done so, you should perform the TCP/IP basic setup 
procedures prior to installing a printer for LPR printing.