Axis OfficeBasic USB Wireless Print Server 0208-002 Dépliant

40

AXIS OfficeBasic USB Wireless

1. Verify that the DIP switch is on “Nor.” 

2. Disconnect the external power supply. 

3. Hold down the reset button. 

4. Reconnect the external power supply. Wait until the orange and green LED 

indicators have blinked twice simultaneously.

5. Release the reset button.

6. The print server will restart (orange Status LED will blink 5 times).

•  Performing a Factory Default will erase all settings of the print server to 

default and should be performed with caution!

• After performing a Factory Default, the default wireless settings will be:

• Infrastructure mode
• SSID = <ANY> (will connect with the Access Point that has the best 

signal in your wireless network)

• Data transmit rate = Auto
• WEP disabled
• Authentication Type = Open System
• Channel  =  6
• DHCP  enabled