Extron Electronics EXTSL250W Manuale Utente
ShareLink 250 W • Using the Embedded Web Pages
47
WebShare Setup
Figure 46.
WebShare Setup
1
Auto Refresh Interval (second) Panel
Use this section to configure the refresh interval time (the amount of time that elapses
before the ShareLink 250 W refreshes).
before the ShareLink 250 W refreshes).
•
Manual Refresh
•
10 - 90 (seconds): Select the best option for the amount of users.
2
Access Password Control Panel
Use this section to disable or configure the WebShare access password (this is the
password required when connecting to the ShareLink 250 W through WebShare):
password required when connecting to the ShareLink 250 W through WebShare):
•
Disable: Select to disable the password. This allows users to connect to the
ShareLink 250 W through WebShare without a password.
•
Use the same password as “Code”: Select this option to make the
WebShare access password the same as the Code on the standby screen.
•
Use the following Code: Enter a custom code to use as the WebShare
access password.