Extron Electronics EXTSL250W Manuale Utente
ShareLink 250 W • Using the Embedded Web Pages
40
Device Setup
Figure 39.
Device Setup Panel
1
Device Setup Panel
•
Resolution: Change the output resolution (resolution is set to 720p by default).
Click the drop-down menu to show other resolutions.
•
Code: Customize the login code that is displayed on the standby screen at startup
(see
(see
9
, page 6). Three options are available for the login code:
•
Disable – No login code is required to connect to the ShareLink 250 W.
•
Random (default) – A new random code is generated when the last user
disconnects from the ShareLink 250 W. (For example: User 1 logs in with the
current code, then user 2 logs in with the same code. When users 1 and 2
disconnect from the ShareLink, a new code is generated.)
current code, then user 2 logs in with the same code. When users 1 and 2
disconnect from the ShareLink, a new code is generated.)
•
Use the following code: enter a custom 4-digit login code.
2
Date and Time Settings Panel
•
Choose SNTP/NTP Server Synchronization to specify the time server, or
choose Disable to disable this feature.
NOTE: SNTP/NTP (Simple Network Time Protocol/Network Tie Protocol) is
used for synchronizing the clocks of computer systems over networks.
If SNTP/NTP Server Synchronization is enabled:
•
Server: Enter the NTP server address into this field.
NOTES:
•
If the NTP server address is in the form of a URL, a DNS server address is
required to sync to the NTP server (for example, enter “pool.ntp.org”).
required to sync to the NTP server (for example, enter “pool.ntp.org”).
•
If the NTP server address is in the form of an IP address, a DNS server
address is
address is
not required to sync to the NTP server.
•
Time Zone: Select the appropriate time zone.
3
Terminal Refresh (Reboot) Panel
This feature refreshes the terminal and reboots the system. The terminal refreshes when
a user is not connected and no user is sharing content.
a user is not connected and no user is sharing content.
•
Auto (default) – Device automatically refreshes when a user is not connected and
no user is sharing.
•
Time Set – Schedule a specific time to refresh the terminal (specify that time in
the Time field using the drop-down lists).