Shenzhen Pakesen Electronics Co. Ltd. C320 Manuale Utente
OWNER’S MANUALfor C320 In. The. Element. Bluetooth Speaker
Bluetooth Pairing/Connection
Turn on speaker by pressing the
button.
Bluetooth pairing will activate automatically.
Enable the Bluetooth function on your
device and find C320Bluetooth device from
the list of pairable devices. Click or tap
connect/or tap on the item name to pair the
two devices. After a successful connection,
the speakerwill chime to signify that it has
been paired. Now you can listen to your
music using the wireless speaker.
Enable the Bluetooth function on your
device and find C320Bluetooth device from
the list of pairable devices. Click or tap
connect/or tap on the item name to pair the
two devices. After a successful connection,
the speakerwill chime to signify that it has
been paired. Now you can listen to your
music using the wireless speaker.
Key Functions
On/Off: Press the
button to power the
unit on/off.
Music Pause: Press the
to pause music.
Press
again to resume playback. This
can also be used to answer/end calls.
Volume Increase: Press the
button to
increase volume. Press the
to reduce
volume.
Next Song: Press and hold the
button to
skip to the next song.
Previous Song: Press and hold the
button to go back to the previous song.
button to go back to the previous song.
Accessories Included in Box
1 x C320 Bluetooth Headphones
1 x Micro USB Charging Cable
1 x Owner’s Manual
Micro USB Cable
To charge Device
Plug the small (micro) end of the
USB cable into the USB
charging port on thespeaker and
plug the larger end into the USB
port on a computer or AC
adapter (not included).
USB cable into the USB
charging port on thespeaker and
plug the larger end into the USB
port on a computer or AC
adapter (not included).
Aux Cable
Plug in the aux cable into the 3.5mm jack
of the speaker and the other side into your
device to listen to music with a wire. You
can use this to play music from non-
Bluetooth Enabled devices.
of the speaker and the other side into your
device to listen to music with a wire. You
can use this to play music from non-
Bluetooth Enabled devices.
Important Battery Information
Warning: Your product containers a battery
and charging system which is designated
to work in temperatures that do not exceed
50
and charging system which is designated
to work in temperatures that do not exceed
50
o
C (122
o
F). Leaving this product in a
closed automobile or the trunk of an
automobile where temperatures may
exceed 50
automobile where temperatures may
exceed 50
o
C may result in permanent
battery damage, fire, or explosion. Please
remove your product from the automobile
when you exit, do not place your product in
the trunk of your automobile, and do not
leave your product in any location where
temperatures may exceed 50
remove your product from the automobile
when you exit, do not place your product in
the trunk of your automobile, and do not
leave your product in any location where
temperatures may exceed 50
o
C.
This product contains a non-removeable
Lithium-Ion rechargeable battery.
Lithium-Ion rechargeable battery.
Ecology
Your product must be disposed of properly
according to local laws and regulations.
Because this product contains a battery,
the product must be disposed of separately
from household waste.
according to local laws and regulations.
Because this product contains a battery,
the product must be disposed of separately
from household waste.
Precautions of the Unit
Do not use the unit immediately
after transportation from a cold
place to a warm place;
condensation problems within
the unit may occur affecting
performance.
after transportation from a cold
place to a warm place;
condensation problems within
the unit may occur affecting
performance.
Do not store the unit near fire,
places with high temperature,
and/or in directly sunlight.
Exposure to direct sunlight or
extreme heat (such as inside a
parked car) may cause damage
or malfunction.
places with high temperature,
and/or in directly sunlight.
Exposure to direct sunlight or
extreme heat (such as inside a
parked car) may cause damage
or malfunction.
Clean the unit with a soft cloth or
a damp chamois leather. Never
use solvents.
a damp chamois leather. Never
use solvents.
Listen Responsibly
To avoid hearing damage, make sure that
the volume on your music player is turned
down before playing music through your
speaker. Noise levels are measured in
decibels (dB), exposure to any noise at or
above 85 dB can cause gradual hearing
loss. Monitor your use; hearing loss is a
function of loudness over time. The louder
it is, the less time you can be exposed to it.
The softer it is, the more time you can
listen to it.
the volume on your music player is turned
down before playing music through your
speaker. Noise levels are measured in
decibels (dB), exposure to any noise at or
above 85 dB can cause gradual hearing
loss. Monitor your use; hearing loss is a
function of loudness over time. The louder
it is, the less time you can be exposed to it.
The softer it is, the more time you can
listen to it.
The Bluetooth
®
work mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Edge Imports Inc. is under license. Other
trademarks and trade names belong to
their respective owners.
SIG, Inc. and any use of such marks by
Edge Imports Inc. is under license. Other
trademarks and trade names belong to
their respective owners.
FCC Warning Statement
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment. This equipment
has been tested and found to comply with
the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
‐ Reorient or relocate the receiving anten
na.
‐ Increase the separation between the eq
uipment and receiver.
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment. This equipment
has been tested and found to comply with
the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
‐ Reorient or relocate the receiving anten
na.
‐ Increase the separation between the eq
uipment and receiver.
‐Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
a circuit different from that to which the
receiver is connected.
‐ Consult the dealer or an experienced ra
dio/TV technician for help.
dio/TV technician for help.
FCC Information
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
FCC ID: 2AE9W-C320
Model: C320