Kenxen Electronic Limited. IP01 Manuale Utente

IP01 Cloud Camera is designed for middle, small enterprise & normal 

family use and it can monitor your environment in 24 hours every day. 

night time. It supports Wireless connection and it is convenient to setup 

& operate.

•  802.11n Wireless Standard;

•  Motion & sound detection;

•  Wireless connection and no need for network wire connection;

•  High quality level 720P CMOS sensor;

•  Send snapshot or video to cloud server;

environment.

Dimensions

124 X 80 X 35mm

Weight

208 g

Audio

Linear input/output    two-way voice intercom

Audio compression   PCM or ADPCM

Video compression

H.264

Working frequency

50Hz / 60Hz

Video Format

720p / 512kbps , WVGA / 256kbps, WQVGA  

/ 128kbps    

Exposure balance

Automatic

White balance

Automatic

Infrared mode

Automatic

Night vision

8 infrared lights,  infrared irradiation 

distance: 3-4meters

Supported protocol

TCP/IP

Wireless standard

WIFI(IEEE802.11b/g/n)         

Support IP 

addresses

Dynamic IP are supported

Operating 

temperature

0° ~ 40°C

Operating humidity

10% ~ 85% (non-condensing)

Storage 

temperature

-10°C ~ 60°

Storage humidity

10% ~ 85%(non-condensing)

Operation system

Microsoft Windows 2000/XP, Vista, 

Windows7, Windows8,Mac OS, Linux

Alarm detection

Motion detection support  

Noise Detection

a) Connect your mobile to your Wi-Fi router
b) Connect the USB cable to the IP camera and the USB power adaptor, 
    plug in the power adaptor into the power socket
c) Wait for around 30 second for device startup, there is a flash green light 
    at the right on the IP camera

a) Click the “DirectGear” on the screen
b) You will see the “DIRECTGEAR” logo shown
c) The first time you start, the Sign up screen will show

d) Type in an e-mail address and password into the relate field. 
    Retype the password for double confirm
e) Click the “Sign up” button to register
f) You will received an e-mail for the registration, click the link on the 
   e-mail to confirm

a) The first time login, it prompt for e-mail address and password
b) Click “Log in” after finish type in

a) If forgot the password, select the lower right corner “Forgot password” 
    at the “Log in” 

b) Type in the e-mail address
c) Click “Send” and system will send an e-mail to your mailbox to reset 
    your password

a) After login, the first screen will show which said “Your account is lonely.
    It needs a camera. Add on by tapping below.” 
b) Click the “Add camera”
c) The add camera welcome screen will show

d) You need your mobile connect to the same Wi-Fi network. 
    Then click “OK”
e) Follow the instruction on the screen, then click “Next”
f ) Press the “Reset” button at the back of the IP camera for at least two 
    seconds until you hear a “beep” sound. Then click “Next” on the screen

i) It will scan the QR code on the mobile screen. Usually take 2~5 seconds. 
   After you hear the “beep beep” sound, you can click the “Yes, I heard it” 
   button.
j) It will automatic configure the IP camera, it need takes around 20 to 30 
   seconds.

k) After finished, it will show two fields which you can change the device 
    name and time zone. Click “Let’s go” after finish modify. Now the 
    camera is ready.

g) It will prompt to select the Wi-Fi network and input the password. Press 
    “Next” when finished.
h) Read the instruction on the screen. It asks you hold the mobile in front 
    of the camera between 10cm~20cm after click the “OK”.

     

DIRECTGEAR